Finished my 1st 2 Madbean builds

[bcalla]

I finished a Karate Shop / Harmonic Energizer:





And a Honey Dripper / Colosound Dipthonizer





I initially had some noise problems with the Karate Shop, but thanks to support from the forum that is resolved and it sounds great.  The Honey Dripper worked perfect first try, and it is an amazing effect!

[selfdestroyer]

Great builds.. that Honey Dripper looks very pro. Love the color and graphics.

[MattOcaster]

Awesome stuff!

[rullywowr]

Congrats!  They look great!

[H.E.L.Shane]

mad props for squeezing the honey dripper in that box!!!!

[gingataff]

Nice builds and 2 kickass choices for first Madbeans 

[jimilee]

mad props for squeezing the honey dripper in that box!!!!

This!!! Wow nice job,I tried like hell to get mine into a 125b before I gave up. Those look great.

[Cortexturizer]

Very good man, keep em coming!

[TreeSlayer]

mad props for squeezing the honey dripper in that box!!!!

This!!! Wow nice job,I tried like hell to get mine into a 125b before I gave up. Those look great.

now that I see how he's done it, i'm doin mine the same way!

[bcalla]

Thanks for the compliments, I'm pretty happy with both.

For the Honey Dripper, I had to flatten the terminals on the 9v jack to clear the board.  There is actually a tiny amount of wiggle room in that enclosure.  I originally planned to place the stomp switch a little tighter against the bottom edge to make room for the jacks, but then I thought I might have to twist it 90 degrees to give additional jack clearance.

If anyone is interested, I'd be happy to share my Inkscape layout, it has crosshairs for the hole locations.

Bob

[gtr2]

Cool stuff!

Josh

[TreeSlayer]

Thanks for the compliments, I'm pretty happy with both.

For the Honey Dripper, I had to flatten the terminals on the 9v jack to clear the board.  There is actually a tiny amount of wiggle room in that enclosure.  I originally planned to place the stomp switch a little tighter against the bottom edge to make room for the jacks, but then I thought I might have to twist it 90 degrees to give additional jack clearance.

If anyone is interested, I'd be happy to share my Inkscape layout, it has crosshairs for the hole locations.

Bob

I am definitely interested! thanks Bob!

Layton

[TreeSlayer]

Thanks for the compliments, I'm pretty happy with both.

For the Honey Dripper, I had to flatten the terminals on the 9v jack to clear the board.  There is actually a tiny amount of wiggle room in that enclosure.  I originally planned to place the stomp switch a little tighter against the bottom edge to make room for the jacks, but then I thought I might have to twist it 90 degrees to give additional jack clearance.

If anyone is interested, I'd be happy to share my Inkscape layout, it has crosshairs for the hole locations.

Bob

I am definitely interested! thanks Bob!

Layton

thanks for sharing, Bob! if you need anything, just holler!

LT

[raulduke]

Congrats dude.

They both look great too; really cool graphics!

[fendman]

That is two pedals to be proud of, I like the way you did the Honeydripper.

Great work fella

Mike