News:

Forum may be experiencing issues.

Main Menu

Blinking LED Help (Solved)

Started by pryde, February 17, 2013, 10:02:52 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pryde

February 17, 2013, 10:02:52 PM Last Edit: February 18, 2013, 12:28:54 AM by pryde
So I put together this vero of a EA tremolo which sounds really fantastic however I would like to have the LED be a dual-function for RATE and on/off indicator. The vero is currently wired with both + and - LED which gives a blinking LED but it is ALWAYS on, even in bypass.

I would like it to shut off in bypass as well as blink with the rate when on. Cant seam to figure this out with the standard madbean wiring scheme? Attached is the vero I am using for reference. Thanks.

jimilee

#1
February 17, 2013, 10:04:56 PM
I just saw a phaser demo on youtube like that also,I would be annoyed by that.
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

gtr2

#2
February 17, 2013, 10:08:03 PM
Instead of wiring the LED cathode (-) to the vero just wire it to the top left lug of a 3PDT per madbeans wiring diagram.

Josh
1776 EFFECTS STORE     
Contract PCB designer

pryde

#3
February 17, 2013, 10:28:54 PM
Quote from: gtr2 on February 17, 2013, 10:08:03 PM
Instead of wiring the LED cathode (-) to the vero just wire it to the top left lug of a 3PDT per madbeans wiring diagram.

Josh

Thanks. I did try that already but it looses the RATE function that way (It only turns on/off.) The LED cathode needs to return to the circuit on order to blink with the rate speed.

pryde

#4
February 18, 2013, 12:29:56 AM
Found a GGG diagram for alternate 3pdt wiring. thanks  :)
Print
Go Up Pages1
User actions