POST YOUR PEDALBOARD / GEAR!

[alanp]

Someone suggested it was time for another group shot.



Here you go

[pickdropper]

I can't remember if I've posted these here or not.  The big board is the one in my office.  It's not terribly portable.   



This is my small acrylic board.  I've got a couple of these.

[the3secondrule]

couple of updates to my bass and guitar boards...

bass board goes:
lowrider, slow loris, muddbunny, tonepad sansamp GT2, sharkfin, stereo memoryman w/ hazarai, AD9

Guitar:
Stomptown MkII tonebender, egghead, mudbunny, timmy, EB VP Jr, rc2, Nova, AB dlx, Ea trem, THcustom reverb

[alanp]

Finally got around to zipping it down. The Dirtbag is in the loop of the flange, the Multiplex is after the flange. They'd been sitting loose on the big rack, before this.

[alanp]

Oh, and I found that the Loop affects the regen setting on the Flange, quite badly.

If the thing in the loop amplifies a bit (like a distortion or boost, say), it will oscillate early. Very early.

If it cuts signal a bit (like my v3205 Dirtbag with no freaking headroom), it will oscillate at the end of pot travel, and not a smidgen before.

[Gledison]

Hey! Very nice board! What is the prdal on the right side? It looks cool!

[Gledison]

I will be back to this topic in one year! Only two oedala at the monent! :-(

[alanp]

The 40% and Flatlife are on the board, so I had to rearrange it. (Going to ziptie everything down later, I wanted to check how well it worked at practice first.) The nailpolish on the 40% reflects the flash, I'm afraid. Probably because the paint is a bit lumpy.

The Cavedweller originally went on purely to connect two too-short patch leads, but it's staying there as a brilliant little ambient delay.

[GrindCustoms]

Finally put this together, going to jam with some friends in the holydays.... so i needed something that would cover pretty much everything.



Pre:
-Buffer/TunerMute
-Rotten Komp
-Qtron+
-Flabergaster
-GodaSound Effects Un Ojo Fuzz Prototype
-Ludicrous Screamer
-ISP Decimator

Loop:
-NicoFX Echo
-Phase45
-MXR117 Flanger
-CE2 Chorus
-Maxon AD999

[Cortexturizer]

hm, decimator. anyone out there at the moment who's offering decimator boards? [the Galego ones]

[juansolo]

hm, decimator. anyone out there at the moment who's offering decimator boards? [the Galego ones]

Haberdasher did 'em for me.

[marmaliser]

hm, decimator. anyone out there at the moment who's offering decimator boards?

http://www.efekty-diy.pl/index.html

[Cortexturizer]

marmaliser that looks great! I've sent the e-mail to the owner of the site

[Matt]

Starting from top left;  Harmonic tremolo (1776 Effects Cardinal tremolo), Marshall footswitch, Worthog ( Madbean Current Lover) with separate depth control for filter mode, Deluxe Delay ( basically a 2 mode version of the Madbean ZPSDX).

Bottom row; Tube Screamer clone (cross between a Paisley Drive and a modded TS with a mosfet boost), Compressor (BYOC 5 knob), Boss GE7b (modded to a GE7 and upgraded ICs), Rotolux (Madbean Harbinger with a switch for phase shifter mode), Boss TU2, Dunlop 535Q

[icecycle66]

Man, you guys' pedal boards are all so nice and neat. 

I need to bring someone over and fix mine up for me. I just throw that crap on the floor and as long as the cables and power reach it's good.