Noisy Cricket

[jimilee]

A few days ago, i found a layout for a noisy cricket on a radioshack prefab project board with a headphone jack,and now I can't find it again,does anyone know what I'm talking and have said layout?

[aballen]

http://www.beavisaudio.com/projects/NoisyCricket/

Noisy cricket PDF at the bottom.  Also a nice single sided pcb with board mounted pots.

[jimilee]

http://www.beavisaudio.com/projects/NoisyCricket/

Noisy cricket PDF at the bottom.  Also a nice single sided pcb with board mounted pots.

Thanks,I'm also looking for the layout with the headphone jack,do you have that one?

[aballen]

No but runoff groove has an article on adding a headphone jack to the ruby amp that will accomplish the same thing.

[jimilee]

No but runoff groove has an article on adding a headphone jack to the ruby amp that will accomplish the same thing.

That will work, thanks

[jeffaroo]

let me know how yours turned out. i built one and it sounds like a blown speaker.
let me just say that this bitch really neded to be breadboarded. i would also make a ground lug for the chasis mine was looking ugly when it was done. next time im going to take a 2" chunk of 14 gauge  copper
and bend it like this ______________
                        _ l                      l_ screw it down to the chasis with 2 screws.
lots of bs going on with the grounds, with this you got a place to simply hook it and shoot it.

[jimilee]

Will do, did you use the radio Shack board or Vero? I really just want it to test pedals, right now I use my ipod touch with an irig, but that's just a hassle really.

[jeffaroo]

radio shack board, those are good to have a few on the bench

[jimilee]

Picked some up today

[pedalman]

hmmm
http://www.parts-express.com/cat/audio-amplifier-boards-modules/3464
makes you wonder

[aballen]

Hey man.  I was going through my parts bin and found this. 



It's a noisy cricket I etched some time back.  The one with board mounted pots and switches. Not quite perfect, but totally useable etch.  PM me if you want it.   I even tinned it.  You just have to drill it and its good to go.

[pedalman]

i will take it if jimmi dont want it. let me know. you have the build report for it ?

[aballen]

It's yours if Jimi does not want it.  For more info. And parts list check post #2

[jimilee]

I got the radio Shack board I was gonna use, do you have a schematic for it?

[aballen]

Layout, parts list and schematic linked above. If you don't want it just say so and it will go to pedalman