Thunderpuss Build - Doesn't work!!

[themachinerages]

When I plug my guitar through the pedal, it makes sound when the Thunderpuss is bypassed, but when I turn it on, there is no sound at all.

This is my second build, and the first one didn't work either. I scrapped it and tried this one, doesn't work  Help save my faith in building pedals!!

This is a messy photo but if you anyone can see a problem right off the bat, let me know:

http://i47.tinypic.com/2udzvpf.jpg

Thanks!!
-John

[Stomptown]

a better pic would probably be a good idea. One thing I noticed is the pins of the potentiometer might be shorting out on the enclosure??? Just a thought. If so, put some tape or something between the pot and the box. Also make sure the pot is not in contact with the bezel...

[midwayfair]

You're going to have to remove the whole thing from the enclosure before any serious troubleshooting can be done. Check the tech help sticky for several tips.

Clearer photos are a start; voltages are better and will find the solution much quicker. (The tech help thread will teach you how to take voltages.)

Remember: "Rock it before you box it."

[vattern]

I could be wrong, but please check the wiring on the DC jack. It looks to me like it is wired in reverse ?