CJ's Game Of Tones Build DOC

[jimilee]

Grindcustoms.com. Is that the same board you have?

[GrindCustoms]

Grindcustoms.com. Is that the same board you have?

Yes Sir Yes!

Effdub/Grind Coalition!

[Clayford]

Grindcustoms.com. Is that the same board you have?

Yes Sir Yes!

Effdub/Grind Coalition!

Grind,
I think the issue is a missing build doc... Can you help him out?

[GermanCdn]

Pretty sure the build doc is exactly the same for both, so the one on Rej's site will work fine.

[Clayford]

I tried looking on his site - THe goat is a Blues Breaker board - but I couldn't find a KOT board... Perhaps I'm overlooking?

[culturejam]

I tried looking on his site - THe goat is a Blues Breaker board - but I couldn't find a KOT board... Perhaps I'm overlooking?

KOT = Bluesbreaker X2

[GrindCustoms]

It's the same pcb layout.. just some part number that have changed i believe... use pcb image as reference.

And yes they are modified BBOD, like Forrest said you'll need 2 in order to make a KOT.

[Clayford]

I thought I remembered reading somewhere that you had stacked opamps, different diodes, and a different gain pot or something for the higher gain side

Perhaps my madness has finally taken over?

[GermanCdn]

No, I built mine up with different opamps (not stacked) and different diodes and pots, so you are correct, but that was just my own take off of Rej's boards.  But the core BOM is the same.

[jimilee]

I thought I remembered reading somewhere that you had stacked opamps, different diodes, and a different gain pot or something for the higher gain side

Perhaps my madness has finally taken over?

Yep, on the forums and grind customs, Rej makes some suggestions on how to do it. I stacked them on one side, sounds pretty mean.

[GrindCustoms]

Don't know if it's written somewhere, but i also use C250K for the HighGain side that i usually put in front of the LowerGain one, it's stacks better to me.