NPD - Lovetone

[JJPJ83]

I'm not as good as Brian, Josh, or some other Eagle experts here, but here is my doublesided Doppelganger board. As I said earlier, I'm still learning how to use Eagle. I have not finished the wiring details yet, in case anyone is wondering what all the SW connections are for. These will connect to the foot switches and toggle switches.



The board is limited in size as I have the Eagle lite version and it limits you to the size board you can do. Anyway, I hope to finish checking some things and send this to Osh Park soon so I can verify it.

Rotary switches, LED's (except LDR LED's), and Pots will mount to the back side of the board. I used 9mm pots for this layout. A little nervous about the spacing for knobs!

Let me know what you think.

I'm looking for an Eagle .lbr with that exact rotary switch. Can you please point me in the right direction to where I can download it? Or did you create the part in Eagle yourself? Any help anyone can give is appreciated.
- Joe.

[alanp]

http://www.madbeanpedals.com/forum/index.php?topic=12945.0

Check the 2014 version.