Mud Bunny pots

[SGJarrod]

I see that on the parts lists on V1 and V1.1 the pots are all 100kB and on the V1.5 the Vol is 100kA, I bought this board last month, does it matter which I use for the Vol pot?......I understand the difference in the tapers but do not know it there are any other effects on the circuit...Thanks

[CRBMoA]

Normally, a Vol pot is an 'A' and Tone & Sustain pots are 'B', but in truth either taper will work.

I am quite sure I have B100Ks on the Sus and Tone and a A100K in the Volume spot on my Muff clone.

You could use all A's, all B's, or any combination. Tone pots tend to respond in a more predictable fashion with B's, but as long as the pots are 100K, you can't go wrong.

The Muffs are VERY forgiving circuits. I have built more Muffs and Muff derivatives than any other pedal. I have never built one I don't like.

[SGJarrod]

right on.... I have both on hand but just wanted to be sure..... cuz u know once u have everything in the box all nice and neat you really do not want to take it all back out