03.18 - PreOrders are available

[ramengo]

hi madbean... sorry for the stupid questions...can i  insert the switch in the rat for change the clipping mode?

i will buy this http://www.madbeanpedals.com/projects/Runt/Runt.pdf

and olso...if i don't do in this layout, can i remove the pot sweep of this progect?

http://www.madbeanpedals.com/projects/SlowLoris/docs/SlowLoris.pdf

[madbean]

Ramengo,

You can do the diodes switching on the Runt, but you are not going to be able to fit it all in a 1590A enclosure, I'm afraid. You can remove the sweep pot on the Slow Loris by jumpering pads 1 and 2 for the Sweep pot on the PCB.

---------------------------------------

All the documentation for the new projects is now available, except for the Collosalus. I have added dimensions for the Baby Boards PCBs in each document, and I have also made notes in the Slow Loris doc repeating this: http://www.madbeanpedals.com/forum/index.php?topic=4362.0

To do: The Collosalus will take a bit of time to document, but I am attaching both the schematic and BOM to this post for anyone who wants to get their parts together. Also, I will be typing up the ordering guide for the Baby Board today and tomorrow, so I will let everyone know once that is online.

NOTE_ There is a 500k trimpot missing for the BOM. That is for the Clock (it's in the schematic).

[marmaliser]

All the documentation for the new projects is now available, except for the Collosalus. I have added dimensions for the Baby Boards PCBs in each document,

Thanks Bean:)

[DutchMF]

Thanks for posting the Collosalus BOM, Brian, that's just what I needed! I'm gonna get my parts-order sorted out and order some more boards when that's done. Damn, never thought doing this would be so addictive...... I love it!

Paul

[madbean]

For the Collosalus, I found 47pF worked best with the clock (most likely because of the clock buffer), but I do suggest having a 33pF and 22pF handy just in case.

[DutchMF]

I'll keep in mind to socket that capacitor! There's no dual IC layout (as in the porkbarrel and currentlover) for this one?

Paul

[madbean]

I'll keep in mind to socket that capacitor! There's no dual IC layout (as in the porkbarrel and currentlover) for this one?

Paul

No, this is MN3007 only.

[madbean]

Here's a little Runtiness.

[gtr2]

mmm tasty!

I'm diggin the metal can IC as well!



Josh

[night-B]

May I ask where have you found these cool jacks (in out and also DC)? I've never seen some like these before...

[nzCdog]

Ah... so cool! Very impressive enclosure-packing... squeezed so much in there

[pryde]

Just gorgeous 

I cant wait till the baby overdrive comes out (outlander). Any teaser info on what this pedal will consist of?

[Haberdasher]

collosalus going into a 1590bb or can it fit in 125?

[madbean]

night-B  - I'll have info on the parts and hardware used for the build  in this doc I'm working on (actually the build tutorial portion is done---just gotta get the links for the parts in there).

pryde  - The Outlander is going to be a sort-of combination of an OCD and Zen Drive, I think. I have high hopes for it but I haven't even breadboarded it yet 

Haberdasher  - The Collosalus requires a 1590BB.

[thetrend77]

Does the Runt use board mounted 9mm pots? Actually, do all the baby boards use them?