Dory Delay - Pixar Series - (Sea Urchin content)

[GrindCustoms]

The infinite feedback mod, that's a simple NO Momentary switch between lug 3 and  2 of the Feedback knob?

So you're telling me that i'll have to add another footswitch to all my delay?

[eldanko]

Only if you want an instant wall of noise at your disposal at any given time.  Like I do. 

[GrindCustoms]

Only if you want an instant wall of noise at your disposal at any given time.  Like I do. 

Hahaha, YES! That's where i have the most skills on guitar..........doing noise!

[pickdropper]

I actually put this on both of my Neptune Delays.  Like eldanko, I use a DPDT switch to toggle between CJ's freakout mode and the infinite feedback mode.

On the second one, I added a 10k resistor so that the feedback knob wasn't quite all the way up.  It still goes off into la-la land, but it doesn't seem distort quite as fast.

The other one is at work, however, so I really need to do a direct comparison.

[eldanko]

I actually put this on both of my Neptune Delays.  Like eldanko, I use a DPDT switch to toggle between CJ's freakout mode and the infinite feedback mode.

On the second one, I added a 10k resistor so that the feedback knob wasn't quite all the way up.  It still goes off into la-la land, but it doesn't seem distort quite as fast.

The other one is at work, however, so I really need to do a direct comparison.

Why, that's a lovely idea... I might crack open Dory and Calvin (my Aquaboy) and experiment a bit tonight...

[GrindCustoms]

I actually put this on both of my Neptune Delays.  Like eldanko, I use a DPDT switch to toggle between CJ's freakout mode and the infinite feedback mode.

On the second one, I added a 10k resistor so that the feedback knob wasn't quite all the way up.  It still goes off into la-la land, but it doesn't seem distort quite as fast.

The other one is at work, however, so I really need to do a direct comparison.

Dave, that's a freaking clever idea............!

Thanks for pushing my switch love to another level 

[Vivaeddie]

Hi! could you kindly publish a diagram or drawing of the connection on the switch? which components or switch should I use? Thanks

If I recall correctly, I just connected the two terminals on the (normally open) SPST switch to terminals 1 and 2 on the repeats pot.  You can confirm that by just jumpering the pot lugs with a lead while the effect is engaged before soldering them.
[/quote]


perhaps you meant terminals 2 and 3? I seem to see this in the photo of the interior. Thank you.

[Vivaeddie]

The infinite feedback mod, that's a simple NO Momentary switch between lug 3 and  2 of the Feedback knob?

So you're telling me that i'll have to add another footswitch to all my delay?

MOMENTARY or NO MOMENTARY switch?

[GrindCustoms]

NO Momentary, wired to lugs 3 and 2............enjoy the runaway!