News:

Forum may be experiencing issues.

Main Menu

Anamorph question

Started by TNblueshawk, February 22, 2025, 05:43:23 PM

Previous topic - Next topic

TNblueshawk

Ok, so I built this and everything works but something is off OR maybe this is such a unique delay that I'm not understanding what the ideal sound is.

Before I post pics, voltages etc... I thought I'd start with a question first. It's hard to describe but for example as you play chords there is a huge swell up and down almost like you would set your modulation on any given pedal to extremes. Sounds trippy as hell and rather cool but no matter how I set either the trimmers or knobs it has this sound. Think WWWWOOOOoooooowwwwwwWWWOOOOoooooowwwwWWWWWOOOOOoooooWwwww.........   assuming that makes sense  :o

Is this what the pedal was designed to sound like? I found one good demo out there that kind of has that sound but not on the extreme of mine by no means.

One anomaly that I have is that for the khz check the lowest I could get is 111 Hz. No idea why. Checked the value of the trimmer and that's good. Maybe causing the issue?

John

TNblueshawk

Just a bump for this chump.
John

jimilee

Got any sound files or videos?


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

madbean

Is this in stereo or mono? In stereo mode I would say there is definitely a "bloom" effect in mixing the wet and dry signal. This is due to the wet signal being inverted before mixing to the stereo output. But,it should not be present in mono output.

TNblueshawk

It's in mono although I've wired for stereo. I don't have any sound files. I'll try to record off the Iphone and then figure out how to load.
John