News:

Forum may be experiencing issues.

Main Menu

Aqua puss board BBD conversion.

Started by LaceSensor, January 04, 2012, 04:38:27 PM

Previous topic - Next topic

LaceSensor

Hi all

I have got one of the old FSB Aqua Puss boards in a trade (a red one, I beleive the latest version).
OBviously its designed for the MN3005, but they are too hard to get.

Do you reckon I could succesfully make a daughter board, incorporating the jumpers seen on the madbean aquaboy, and then run this via jumpers to the IC socket on the board?

Or am i pipe dreaming?

Thanks for your insights

Ian

Scruffie

Swap Vdd & Gnd, Connect Vgg & Vdd.

Tie the output resistors to ground (that'd be R24 on the new boards).

Might have to cut some tracks I can't think straight right now and don't have the files for this exact board.
Works at Lectric-FX

LaceSensor

Sounds tricksy

When you have a clearer minute at your leisure of course and if you wouldnt mind checking it out thatd be grand. I have some diagrams of the FSB puss board..

thanks a mill

Scruffie

Quote from: LaceSensor on January 04, 2012, 10:33:59 PM
Sounds tricksy

When you have a clearer minute at your leisure of course and if you wouldnt mind checking it out thatd be grand. I have some diagrams of the FSB puss board..

thanks a mill
Chuck us a diagram then and i'll have a look, shouldn't be too tricky.
Works at Lectric-FX

LaceSensor

Im talking tosh all I have is pics of the PCB and a BOM, sorry.
Ill have a dig at FSB...