What effects do you put togeather in one encloser

[Hefty]

I was wondering what effects do you put together in one pedal encloser? I have a couple of larger enclosures I was always going to put a couple of effects together in but always wonder what effects I should box up together. Any ideas and reason why you all decide on certain combinations. Any help would be appreciated

[jimilee]

I put my favs in one, like a phaser delay and overdrive, for example. That would be an all in one bass board to grab and go.


Sent from my iPhone using Tapatalk

[Bio77]

Agree with Jimi on the fave pedal, that one would be for personal use, so, whatever you use.  If you want something with more broad appeal, a dual overdrive or a boost into an overdrive are handy.  I've built several klon into TS9 pedals.

[dan.schumaker]

What I've been doing when I put a few in an enclosure is thinking of a specific artist and what they would use as their pedalboard.  Doing that, you will have a grab-and-go all-in-one pedalboard solution.  Here is a few that I've done

Luna Obscura - Gilmour DSOTM inspired; Fuzz Face, Overdriver Boost, Uni-Vibe and Binson Delay


Kashmir - Jimmy Page inspired; Silicon Tone Bender, Phase 90, Modulated Delay, EP-style Boost and Marshall amp


Gypsy - Hendrix inspired; Fuzz Face, Octave Fuzz, Uni-Vibe and Marshall amp


Purple Reign - Prince 1999 pedalboard inspired; SD-1, DM-2, BF-2, OC-2 & VB-2


6-shooter - This one was just a challenge from the guys at stompboxparts to see how much I could shove in one box... it has a Rangemaster, Dumble-type OD, BMP-type Dist, Small Stone Phaser, Micro Chorus and Delay

[jimilee]

I did a slowgear, a delay a phaser and a reverb all in one. It was my BOTY entry one year.


Sent from my iPhone using Tapatalk

[culturejam]

I like delay + reverb, or if you have a huge box, do those two plus a trem.

[Hefty]

What I've been doing when I put a few in an enclosure is thinking of a specific artist and what they would use as their pedalboard.  Doing that, you will have a grab-and-go all-in-one pedalboard solution.  Here is a few that I've done

Luna Obscura - Gilmour DSOTM inspired; Fuzz Face, Overdriver Boost, Uni-Vibe and Binson Delay


Kashmir - Jimmy Page inspired; Silicon Tone Bender, Phase 90, Modulated Delay, EP-style Boost and Marshall amp


Gypsy - Hendrix inspired; Fuzz Face, Octave Fuzz, Uni-Vibe and Marshall amp


Purple Reign - Prince 1999 pedalboard inspired; SD-1, DM-2, BF-2, OC-2 & VB-2


6-shooter - This one was just a challenge from the guys at stompboxparts to see how much I could shove in one box... it has a Rangemaster, Dumble-type OD, BMP-type Dist, Small Stone Phaser, Micro Chorus and Delay

WOW kinda mind blowing Dan, I have on enclosuure like your narrow long one, the six shooter. I don't think I will stuff it that full but you sure gave me a few ideas.

[Hefty]

One of the combos I was thinking about was delay/reverb, so those ideas are probaly the first combo I try. I have got to look up that BOTY Jimilee. Thanks for the ideas everyone, keep them coming

[Tremster]

Make sure that you know and like the two circuits before you put them in one enclosure. I had put two different overdrives or one boost and one overdrive or two boosts in one box, but tastes change and I only ended up using one. Luckily, I got those sold.
Currently on my board are these 2-in-1s:
dual compressor (DOD 280 and RottenKomp)
Green Ringer + ZVex Machine (great noise combination)
Silicon Fuzz Face + Silicon Tonebender Mk2
LPB1 + Naga Viper
Runoffgroove TriVibe + STM Tremolo

[Hefty]

Builder's remorse, Good advice

Make sure that you know and like the two circuits before you put them in one enclosure. I had put two different overdrives or one boost and one overdrive or two boosts in one box, but tastes change and I only ended up using one. Luckily, I got those sold.]

[Aleph Null]

Make sure that you know and like the two circuits before you put them in one enclosure. I had put two different overdrives or one boost and one overdrive or two boosts in one box, but tastes change and I only ended up using one. Luckily, I got those sold.
Currently on my board are these 2-in-1s:
dual compressor (DOD 280 and RottenKomp)
Green Ringer + ZVex Machine (great noise combination)
Silicon Fuzz Face + Silicon Tonebender Mk2
LPB1 + Naga Viper
Runoffgroove TriVibe + STM Tremolo

To build on this idea, finding circuits that you like and that would benefit from switching options make for good multi builds: order switches with gain stages, maybe the option to put a reverb in the loop of a delay in addition to after. Those sorts of options add value to a mutli build.

[Willybomb]

If you search for my username you'll see a few in the build reports, but in a nutshell:

Compressor -> Klon
LPB1 -> Superjudge
Sea Urchin -> Deep Blue Delay
Crunchbox -> DBD (I think)
CE-2 -> DBD -> Rubadub

There's more, but I can't recall off the top of my head.

[gordo]

If you DO change your mind down the road and decide to redo a multi it's amazing how easily decals and clear coat will pull off a powdercoated enclosure with a bit of elbow grease and some duct tape.

[jimilee]

If you DO change your mind down the road and decide to redo a multi it's amazing how easily decals and clear coat will pull off a powdercoated enclosure with a bit of elbow grease and some duct tape.

Redo? Na, this is DIY, build another one!


Sent from my iPhone using Tapatalk

[pickdropper]

Five fuzz circuits.  ;-)