Tayda UV Print and Drill

[justinlawless]

I just got an enclosure UV printed by Tayda and it turned out great. I was thinking of seeing how having them print and drill and enclosure would work out for me but came across something I need a little clarification on. For a 1590B the UV template is 56 x 108.5mm. For the drill template, it's 58 x 110mm and you have to locate the holes from the center of the enclosure.

So should I just measure where I want the holes from the center of my design in the UV template and they should line up correctly during their production? Thanks!

[Derpinador]

why they suggest measure from center, the smaller area is what is FLAT on the enclosure to have non-distorted images and the larger dimension is likely the outsides of the vertical(neither face or backing plates) and would need to know how close you can get to a side.

[BryGuy]

The center is always going to be the center so it actually is a good base point. Just a bit confusing at first maybe with negative and positive dimensions for the drill template.