Tour Bus PGE

[Thewintersoldier]

First off, let me say this is a fantastic project. Kudos to Brian for a fantastic layout and build doc and Benny profane for his help in the calibration write up. Top notch all the way. This went together fast and without a hitch...well just one. I opted to use the optional speed pot instead of the switch. I had an LFO tick and it turns out the wires to the speed pot were too long and amplifying the signal elsewhere, I made them as short as possible and problem solved. Calibration was fast and pretty much down the middle  for each trimmer. The sound...classic DMM in a 125b. What's not to love here. For the enclosure I tried the new metallic silver that tayda is offering and I really like it, it's got a nice semi-gloss sheen that's not too reflective. Kang the conqueror is a man of space and time and perfect for this build. Obligatory glamour shots and video clip showing one of my favorite ways to use the memory man. I plan on doing the negative ground edition as well and running them side by side for a shorter and longer setting. Jump on this people, it's legit and it f*cks.

[madbean]

Looks fantastic. I think you have the first show of a build for this. I'm a little surprised by the ticking but at least it was easily solved.

[Thewintersoldier]

Looks fantastic. I think you have the first show of a build for this. I'm a little surprised by the ticking but at least it was easily solved.

Thanks Brian, I am in love with this pedal. Playing this with the new deluxe electric mistress is the deluxe edition of my playing experience. Now I wait patiently to do it again with the nge while I get lost playing this one lol

[blackhatboojum]

Hot damn!  Amazing build my friend 😁!

[zombie_rock123]

Flawless, sounds absolutely amazing and loving the glamour shot with the top board unplugged

[Thewintersoldier]

Flawless, sounds absolutely amazing and loving the glamour shot with the top board unplugged

Thanks, I thought a lot about how to tastefully show under the top board. I wanted to get really nasty with it and for some reason Bender kept coming to mind.

Sent from my Pixel 5 using Tapatalk

[cooder]

Killa bench mark build and soundz too boost, awesomesauce! Thanks for demo!

[Thewintersoldier]

Killa bench mark build and soundz too boost, awesomesauce! Thanks for demo!

I learned from the best!

Hot damn!  Amazing build my friend 😁!

Thanks Clinton, someone has to show em how it's done lol

[Bio77]

Amazing build, Chris! Your last few are so next level. That silver is killer.   

[Thewintersoldier]

Amazing build, Chris! Your last few are so next level. That silver is killer.

Thanks John, means a lot from someone who's been doing work that's been inspiring me for years now. It's a lot of fun when you are really into the project and it's a pedal you really love.

[gordo]

Very nicely done.  I'm right behind you on the build but CabinTech shorted me a 3005.  They're making good on it (and super cool to deal with) but will be a few days out.  I did get all my voltages in line, it took me a while to get my head wrapped around what should be any easy concept for the positive ground 18v.  It's much easier to follow the color diagram than try to out-think the process.

I gotta go with the silver enclosure, that looks really top notch especially with the usual crazy good artwork.

[Derpinador]

Not bad, I'm at the point of waiting for the board, I got the caps, op amps, and pots from Tayda so held off ordering from B until that box left CO. And yes, likely gonna make the NGE version(why some have 4 TS boxes, set and forget  )
I might make the artwork resemble a school bus though.. got cad orange knobs and led's or was that for the dual box with boost and compressor( I won't spell the joke out...who knows who's 'sensitive' about it around here....)

[Paradox916]

I love the way this turned out,  I'm going to have to try and tackle this at some point.


Sent from my iPhone using Tapatalk