News:

Forum may be experiencing issues.

Main Menu

Help finding Moller Trex tone pot

Started by jamme61, March 22, 2022, 05:34:03 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jamme61

March 22, 2022, 05:34:03 PM Last Edit: March 22, 2022, 06:07:54 PM by jamme61
Its a A22k pot but it has 4 lugs?  I contacted Trex but not getting a response. anyone know where I can buy one? thxs for any help
tried to upload bigger picture

davent

#1
March 22, 2022, 05:54:20 PM
Pictures are too small to make anything out, they're green, i can see that.
"If you always do what you always did- you always get what you always got." - Unknown

If my photos are missing again... they're hosted by photobucket... and as of 06/2017 being held hostage... to be continued?

Govmnt_Lacky

#2
March 22, 2022, 06:51:38 PM
Interesting! It looks like the legs of the pot make contact by pressure instead of being soldered in  :o

Push pot into position so tabs can be soldered in and the legs just make friction contact with SMD pads???

jamme61

#3
March 22, 2022, 10:22:22 PM
I cut the logs off when trying to remove the pot - it was just easier to get out that way.

Govmnt_Lacky

#4
March 23, 2022, 11:12:39 AM
Quote from: jamme61 on March 22, 2022, 10:22:22 PM
I cut the logs off when trying to remove the pot - it was just easier to get out that way.

Gotcha! Couldn't see the pic yesterday.

You need to measure resistance on all of the legs of the pot. The 4th leg could be a dummy leg OR it could be a center-tap. Depending on its usage, there are suitable replacements available.
Print
Go Up Pages1
User actions