wavelord - trimmer adjustment

[nicotina74]

Hi guys, I assembled the wavelord and it's great !! A great pedal !!! In the pdf file there is written "T1: This trimmer sets the gain recovery after the LDR in the opto device. This is set by turning the Depth
knob to zero, Vol to about 2 / 3rd then adjusting T1 for unity gain with bypass. This setting should produce
minimal distortion at the output and allow for a bit of boost when you turn VOL all the way up .. "
I need information to adjust the trimmer ... is there a value that I can measure with the tester to understand when it is adjusted correctly? I hope I have explained myself, sorry for my bad english ...
Many thanks, Nicola.

[Zerro]

I would guess, that you must set it by ear while playing, with switching between bypass and effect.

[nicotina74]

tanks, Zerro!