News:

Forum may be experiencing issues.

Main Menu

Add LED to mudbunny tone dpdt?

Started by thesameage, June 15, 2021, 08:09:22 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

Zerro

#15
July 09, 2021, 05:04:09 PM Last Edit: July 09, 2021, 09:46:07 PM by Zerro
Look upstairs reply #5
"Nudíte se? Kupte si našeho cvičeného ježka! Pobaví vás svými veselýmí kousky!"

matmosphere

#16
July 09, 2021, 07:43:14 PM
Post some pictures

thesameage

#17
July 09, 2021, 08:58:45 PM

thesameage

#19
July 09, 2021, 08:59:31 PM Last Edit: July 09, 2021, 09:01:57 PM by thesameage
This worked! You can see that the board has space for a PCB mounted dpdt switch. I just ran wires to a dpdt footswitch so that I can have easier access.



thesameage

#20
July 12, 2021, 02:56:25 PM
I think I just need to put in a 3dpt switch and add a ground and LED connection. I was playing the pedal this weekend and it seems pretty important to know visually when the tone bypass is on.

jimilee

#21
July 12, 2021, 04:26:44 PM
Are any of the pins grounded when it's bypassed and not when it isn't?


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

matmosphere

#22
July 12, 2021, 05:20:03 PM
Don't think any of the pins are grounded. Swapping to a 3dpt is probably the best way to get it done.

thesameage

#23
July 12, 2021, 08:58:34 PM
As far as I can tell, none of the pins are grounded. That would solve the issue right there.
Print
Go Up Pages 1 2
User actions