Blackout Effectors Cadavernous Reverberator V2

[Sonicblaze]

Yikes, I'm really missing parts/instructions; Didn't even get a 10pin reverb module, but got random pots and some misc components; guess I didn't get a full kit.

Is it just a normal Accutronics BTDR-3H 10pin?

[harryklippton]

It's not truly a kit in the sense that it doesn't come with instructions or all the parts. It is the normal Belton 3 brick. The dip switches are a pain. I bought the wrong one the first time. I'll try to dig up the part number

[Drew Hallenbeck]

https://www.mouser.com/ProductDetail/Grayhill/76SD01T?qs=ls7QRyWmRk5NxN1zsqWu%252BA%3D%3D

Mouser link for the single position switch (the image is misleading as it shows the two position switch)

[Drew Hallenbeck]

https://www.mouser.com/ProductDetail/Grayhill/76SD02T?qs=ls7QRyWmRk4MsxSfc9oHbg%3D%3D

Mouser link for the two position switch.

The other DIP switch to select the function of the "swell" stomp switch is just a standard DIP switch.

[Drew Hallenbeck]

Yikes, I'm really missing parts/instructions; Didn't even get a 10pin reverb module, but got random pots and some misc components; guess I didn't get a full kit.

Is it just a normal Accutronics BTDR-3H 10pin?

I've spent a lot of time with this one. I even bought an original to check the wiring.
I've gotten the circuit traced and started working on some new board layouts.
I have tons of information if you need any help. Just shoot me a message with your email address and I can send you what I have!