Schematic help

[noshybabs]

I can't get some boards I need due to the international postasge embargo so am going to try my hand at making the boards myself here in the UK.

The boards I want to make (and have already bought all the parts for) are the cupcake https://www.madbeanpedals.com/projects/_folders/1590A/schematics/Cupcake2020.gif

I understand the schematic pretty will with the acception some what I think are pads which I have highlighted in red here.



Cany anyone tell me what these are please?

Thanks in advace.

[EBK]

Those correspond to terminals on the 3PDT stomp switch.

[noshybabs]

Of course they are, thank you so much. Im not sure if i would have ever have got there.

[noshybabs]

I have also noticed 3 points on the schematic what say VC in an arrow



Do these want to be connected 9v?

[m-Kresol]

the flags are "net labels". That means that these are connected without drawing a discrete wire in the schematic. makes for much neater schematics overall. In your case it's the 9V net after polarity protection and power filtering. hope that makes sense.

[noshybabs]

It does thaks. The way im reading this the top is VC and the others connect to it?

[m-Kresol]

correct. so basically everything connected to VC has approx. 9V input voltage