Here my Total Recall

[jimilee]

Everyone that has done one has done a similar finish. Here's mine. I wired it true bypass, I was still getting faint delay the other way. I did the 660ms mod by adding a 47pf between pins one and three of the clock. I'm thinking it probably would have fit in a regular 1590BB.




Sent from my iPhone using Tapatalk

[Thewintersoldier]

Das ist gut! You running it at 27 volts? I'm about to build mine in the next week or two. I was gonna use a 125bb but if you think a 1590b is good then maybe I'll cram it into a 1590g with 1/8" headphone jacks and use adapters with my guitar cables lol

[jimilee]

Das ist gut! You running it at 27 volts? I'm about to build mine in the next week or two. I was gonna use a 125bb but if you think a 1590b is good then maybe I'll cram it into a 1590g with 1/8" headphone jacks and use adapters with my guitar cables lol

That was a typo, I meant 1590BB. I used a 1590BBT. A 125BB will swallow this circuit. It is 27volts, I put it on the top to remind myself. Otherwise, I would make myself nuts trying to figure out why it wouldn't work.

[Thewintersoldier]

I thought it was 24v, you running yours higher for more headroom?

Das ist gut! You running it at 27 volts? I'm about to build mine in the next week or two. I was gonna use a 125bb but if you think a 1590b is good then maybe I'll cram it into a 1590g with 1/8" headphone jacks and use adapters with my guitar cables lol

That was a typo, I meant 1590BB. I used a 1590BBT. A 125BB will swallow this circuit. It is 27volts, I put it on the top to remind myself. Otherwise, I would make myself nuts trying to figure out why it wouldn't work.

[jimilee]

I thought it was 24v, you running yours higher for more headroom?

Das ist gut! You running it at 27 volts? I'm about to build mine in the next week or two. I was gonna use a 125bb but if you think a 1590b is good then maybe I'll cram it into a 1590g with 1/8" headphone jacks and use adapters with my guitar cables lol

That was a typo, I meant 1590BB. I used a 1590BBT. A 125BB will swallow this circuit. It is 27volts, I put it on the top to remind myself. Otherwise, I would make myself nuts trying to figure out why it wouldn't work.

Nope, the recommended power adapter is the 27V EHX. The DMM comes with the same. The voltage regulator takes care of the extra 3 volts.

[MTK]

Super clean looking. I really like the label too, it's got that vintage feel. I'd have slipped in a small picture of Quaid right in that blank center position at the top. lol Wouldn't be able to stop myself.

[selfdestroyer]

Damn Jimi, you been on fire lately. Tons of cool builds. I still have one of these unboxed I need to get to.... one day.

[cooder]

Total awesome! Well done, Sir!

[nzCdog]

Dude well done, this is epic.