Mimik 15nf cap question

[mcallisterra]

I recently got a friend of mine into building, and he purchased a Woodstork and Mimik to get started with. Somehow we missed out the 15n caps for the Mimik on the parts order, but I have a handful of 10n caps; would these work for C5, C12, and C15 in the Mimik, or does he need to put in a new order for the 15n caps?

Thanks!

[Aleph Null]

All three of those capacitors are connected to ground, so they'll be acting as low pass filters (sending highs to ground). Smaller values will raise the cut-off frequency: the repeats will be a little brighter. The effect will still work. You might notice more hiss in the repeats than you would with stock values.

[Bio77]

Do you have any 4n7s left over?  You could solder one with a 10n in parallel.

[mcallisterra]

Do you have any 4n7s left over?  You could solder one with a 10n in parallel.

That's a good idea, but unfortunately I don't. Looks like we're placing another order. Thanks!

Sent from my BND-L24 using Tapatalk

[madbean]

I could throw in a few 15n in the mail to you if you want.

[mcallisterra]

I could throw in a few 15n in the mail to you if you want.

Thanks so much Brian! PM incoming.

Sent from my BND-L24 using Tapatalk