Best hookup wire source

[p_wats]

My favourite hookup wire to use is Barry's from Guitarpcb.com, but he has limited orders for that to USA only, based on shipping costs to Canada.

Anybody know of any alternatives for good tinned, stranded wire that is bendable, but solid and reliable? I'm open to other options too, but really like this wire. Thanks!

[Betty Wont]

I really like the #22 pre-bond that Small Bear carries.

[pickdropper]

I really like the #22 pre-bond that Small Bear carries.

I like the #24 version of that stuff.  I'm sure both work similarly.

[jimilee]

Guitar PCH has some of the best wire available on IMO.


Sent from my iPhone using Tapatalk

[p_wats]

Nice. Thanks for the suggestions. I hadn't seen the pre-bond Smallbear stuff and looks like they have several spool size options, which is helpful.

Wish I could still get Barry's, but if the Smallbear stuff compares well it will also be much cheaper.

[Betty Wont]

Nice. Thanks for the suggestions. I hadn't seen the pre-bond Smallbear stuff and looks like they have several spool size options, which is helpful.

Wish I could still get Barry's, but if the Smallbear stuff compares well it will also be much cheaper.

I've tried both. The conductors are comparable, but i prefer the small bear insulation.

[sjaustin]

We did a series of group buys for some wire from a forum member (T-Diddy) at BYOC. It's the best wire I've ever used, bar none. As good as Barry's, but a gauge or two thicker. (No offense to Barry, of course; I just prefer larger wire and larger eyelets for that matter.) I'm almost out of one of my colors and have been thinking about contacting him. I haven't seen him post in quite some time though.

Edit: I emailed him to inquire.

[jimilee]

We did a series of group buys for some wire from a forum member (T-Diddy) at BYOC. It's the best wire I've ever used, bar none. As good as Barry's, but a gauge or two thicker. (No offense to Barry, of course; I just prefer larger wire and larger eyelets for that matter.) I'm almost out of one of my colors and have been thinking about contacting him. I haven't seen him post in quite some time though.

Edit: I emailed him to inquire.

This is the best wire evar! It does feel more solid and breaks less.


Sent from my iPhone using Tapatalk

[tcpoint]

http://www.ebaystores.com/Johns-Silver-Plated-PTFE-Wire-Shop This is the stuff I use.  It's a little harder to strip but you can't melt the insulation with your soldering iron.

[emakris]

Hi,

Smallbear pre-bond is what I use and used for 10+ years. If you are building amps though, use the aerospace grade teflon coated wire from tubedepot. The teflon is extremely hard to strip and is not a pre-bond, but the coating will not melt and the wire is excellent.

Thanks
Ernie
https://www.geargasstore.com

[p_wats]

We did a series of group buys for some wire from a forum member (T-Diddy) at BYOC. It's the best wire I've ever used, bar none. As good as Barry's, but a gauge or two thicker. (No offense to Barry, of course; I just prefer larger wire and larger eyelets for that matter.) I'm almost out of one of my colors and have been thinking about contacting him. I haven't seen him post in quite some time though.

Edit: I emailed him to inquire.

This is the best wire evar! It does feel more solid and breaks less.


Sent from my iPhone using Tapatalk

Good to know! Would be interested if he does another group buy.

Hi,

Smallbear pre-bond is what I use and used for 10+ years. If you are building amps though, use the aerospace grade teflon coated wire from tubedepot. The teflon is extremely hard to strip and is not a pre-bond, but the coating will not melt and the wire is excellent.

Thanks
Ernie
https://www.geargasstore.com

Thanks! I've built a few amps, but nothing in the pipe for now. Good to know for later though.

[davent]

http://www.ebaystores.com/Johns-Silver-Plated-PTFE-Wire-Shop This is the stuff I use.  It's a little harder to strip but you can't melt the insulation with your soldering iron.

I've ordered shielded wire here and had no issues with shipping to Canada at the time.  Also no problem with getting PTFE from Apex Jr. shipped to Canada.. Not bonded but my first choice is always going to be PTFE insulated wire. He has solid core as well.

http://www.apexjr.com/wire.html

dave

[alanp]

The wire Chromesphere sells (DIYGP.au) is also pretty nice. I like that, and the Smallbear pre-bonded stuff.

[sjaustin]

We did a series of group buys for some wire from a forum member (T-Diddy) at BYOC. It's the best wire I've ever used, bar none. As good as Barry's, but a gauge or two thicker. (No offense to Barry, of course; I just prefer larger wire and larger eyelets for that matter.) I'm almost out of one of my colors and have been thinking about contacting him. I haven't seen him post in quite some time though.

Edit: I emailed him to inquire.

This is the best wire evar! It does feel more solid and breaks less.

Good to know! Would be interested if he does another group buy.

I got a quote from Trevor for his wire, because I am almost out of green and yellow, two of the four colors I regularly use. Unfortunately you have to buy 500 feet of the stuff to make it affordable.

His price is $120 per 500 foot roll, plus shipping to me or whomever would run the buy. They have green, yellow, red, and black in stock. That works out to $24 plus shipping for 100 feet, $12 for 50. If I decided to do this, I wouldn't go any less than 50 foot lengths, just too much measuring and cutting and packaging.

I'm not sure I have it in me to run a group buy right now, but... maybe.