Rehoused the "D"

[flanagan0718]

Hello,
     A while ago I did a 1590A reverb for a friend. Well the crappy jacks I used failed and they needed to be replaced. So, I basically rebuilt this pedal. New Jacks, Enclosure, wiring, and Pot. It's a 1776 Rub-A-Dub reverb. Jon Patton (Midwayfair) did the PCB layout. Here are a couple pictures!







Here is a side by side of the new enclosure (on the left) vs the old one (on the right).



Hope you guys like it. Thanks.

-Mike-

[drolo]

Your etching certainly has become sharper :-)
Is that a diy knob ?

[flanagan0718]

Your etching certainly has become sharper :-)
Is that a diy knob ?

Nope I actually got it from okw enclosures. They are expensive, but really nice!

[zombie_rock123]

What PCB layout?! Just pretend its straight into the brick and baffle people looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.

[midwayfair]

This post is triggering my PRSD (post 1590A reverb stress disorder).

[flanagan0718]

This post is triggering my PRSD (post 1590A reverb stress disorder).

lol Mine too. this was the 2nd enclosure i etched for this rehouse. The first i botched drilling.

[flanagan0718]

What PCB layout?! Just pretend its straight into the brick and baffle people looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.

And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.
See




I'll see if i can find the layout for it. and post it if that's cool with Jon.?

[midwayfair]

What PCB layout?! Just pretend its straight into the brick and baffle people looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.

And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.

I'll see if i can find the layout for it. and post it if that's cool with Jon.?

I think you might have posted it in the original build thread. Was that something lost in the crash?

[flanagan0718]

What PCB layout?! Just pretend its straight into the brick and baffle people looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.

And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.

I'll see if i can find the layout for it. and post it if that's cool with Jon.?

I think you might have posted it in the original build thread. Was that something lost in the crash?

that is a good possibility. I'll see if i can find it tho.

[flanagan0718]

I found the files. I highly recommend doing the mods that Jon talks about in the doc. They make the build really shimmer. Here is a link to the folder.

https://www.dropbox.com/sh/u8v8ryynw4wrk3z/AABbwSvT0EOM5Tu9E4zkFq6la?dl=0

[blearyeyes]

Post 1590A Stress Disorder...can you get that just from looking or do you have to actually build one. I'm feeling a bit off after that build.

[mrclean77]

Cramming all that in a 1590A once: curious/devoted

Doing it twice: officially masochistic

(Should this ever apply)

Three times: "out"ing yourself as non-human

[bcalla]

That really is insane!

[Boba7]

Yep, insane and absolutely lovely! Love the look of it! Great great job!!

[flanagan0718]

Thanks for all the kind words guys. I delivered it to my friend Darren yesterday. He's in love with it! Thanks again!


Sent from my iPhone using Tapatalk