A good source for...

[flanagan0718]

Looking for a good source for some NE570, CA3080, and MN3007. I'm out of all three and could use a few of each to tie up some loose ends. I've had a couple good MNs from eBay but I fear that well had dried up. If anyone knows a good source for any and all my ears are open. Thanks in advance.

-Mike-


Sent from my iPhone using Tapatalk

[stecykmi]

smallbear electronics. very reliable source, slightly premium price.

[flanagan0718]

Yeah...I honestly haven't had the best luck with them. Not the parts, those were fine. Thanks for the recommendation tho.

Anywhere else?


Sent from my iPhone using Tapatalk

[Jebus]

BanzaiMusic in Germany has all of those, but the prices are bit high and I don't know how much shipping is to other side of the pond.

Never gotten any bad stuff from them though.

[miha]

I think I got 2 CA3080s from Banzai about 2 years ago and 4 from ebay. The 4 from ebay worked and 1 of the 2 from Banzai didn't. I didn't bother sending it back though. So I guess you can get anything anywhere

[drolo]

for the 3080's I have had more luck finding them as SMD. With an adapter board you can use them in normal sockets

[davent]

Grindcustoms show 3080's as available.

http://www.grindcustomsfx.com/product/rca-ca3080/

dave

[daleykd]

Why not convert to LM13700 for the 3080s?

Curious about the MN3007s myself.

[AntKnee]

Not cheap, but I got some 3007s from guitarpcbs. He guarantees them.

[flanagan0718]

Not cheap, but I got some 3007s from guitarpcbs. He guarantees them.

Hmm good to know. I'll have to check them out.


Sent from my iPhone using Tapatalk

[AntKnee]

Not cheap, but I got some 3007s from guitarpcbs. He guarantees them.

Hmm good to know. I'll have to check them out.


Sent from my iPhone using Tapatalk

I had a look and I don't see them on his site anymore. That was a while back, now that I think about it. I guess he ran out.
Sorry!

[devilsnight]

I think I got 2 CA3080s from Banzai about 2 years ago and 4 from ebay. The 4 from ebay worked and 1 of the 2 from Banzai didn't. I didn't bother sending it back though. So I guess you can get anything anywhere

Good to hear! I bought some off ebay awhile back but haven't tried them yet (I've been a little skeptical of them)
As Daleykd mentioned though the 13700 can be used the same, just found that out the other night. I have all kinds of them!

[bluescage]

There is an adapterboard for LM 13700 to CA 3080 here: http://effectslayouts.blogspot.nl/2015/11/lm13700-to-ca3080-conversion-board.html