News:

Forum may be experiencing issues.

Main Menu

AION STRATUS (TS9)

Started by darrenw6000, January 15, 2017, 02:44:39 PM

Previous topic - Next topic

darrenw6000

im in the middle of doing this ts9 project from Aion and the clipping is confusing me
i am just doing the stock ts9-no mods, the BOM says 4 1n914 and jumper the others

doc: https://www.dropbox.com/s/b2g113hophsg3e9/aion-stratus-ts9-documentation-v2.pdf?dl=1

however in the pdf (page 4) it only shows 2 diodes in stock

this is the silkscreen, can anyone draw on for me where the diodes go for stock version. thanks


dbp512

The top row is D3 and D2, the next row is D4 and D5, and so on. You can see the schematic 2 diodes are stacked in series in the feedback loop, so the extra pads are provided to allow for this. If you only want 1 diode instead, connect it from the leftmost pad of D3 to the circular rightmost pad on the right.
"you truly are a transistor tickler, what with the application of germanium ointment to sensitive fuzzy areas. :)" - playpunk