Trem-O-Verb ended up in a pretty cool spot!

[Drew Hallenbeck]

Tremolo into reverb in one box. I'll have to update with a gut shot later. Built it on strip board, only one little moment of panic. Had a direct short to ground from the +9v. Found a tiny solder bridge and got it cleaned up and put back together.

I built this as a gift for John Baizley of Baroness after having a chance to meet the guys before a show back in May. I delivered it to him at their Detroit show on 8/20 and he put it on his board, in the reverb loop of his gig rig for the show that night!
Pretty cool for any DIY hobby builder to have a build end up on the board of a pro touring musician....
But, this was extra special kick ass for me. Baroness has been one of my absolute favorite bands for a few years now. I've had the good fortune to meet all of the guys and see a couple of great shows.
Super good guys and they put on one hell of a live show!

First time I'm trying to link pictures from Instagram, hopefully I've done it properly......

Guess I goofed the Instagram links....

Do-over from Photobucket.....

[stringsthings]

That looks fantastic.  Is that an etch?  And where did you get the knobs?

[GrindCustoms]

Very nice!

Is that a vero Tenebrion?

[29palms]

wow that looks great! very professional finish.

[Jebus]

Very nice looking build! Great job.

[Drew Hallenbeck]

That looks fantastic.  Is that an etch?  And where did you get the knobs?

Not an etch. I was going to etch it but my toner transfers just weren't working out. Ended up doing a waterslide decal. Sanded the top smooth, couple thin layers of clear, decal, more clear.

The knobs came from a forum member here, flanagan0718
He scored a BUNCH of these knobs and sold some of them off in the "buy,sell,trade" section a few months back.
Wish I would have ordered more of them. I still have a hand full but it'll suck once I run out. Might have to see if I can ask him where he got them for future reference....

[Drew Hallenbeck]

Very nice!

Is that a vero Tenebrion?

Not a Tenebrion but it looks like it's probably a pretty similar circuit.
It's actually a culturejam Box-of-Hall built with the heavenwithin mods.

[matmosphere]

Love the artwork! I bet it doesn't sound to shabby either.

I like the labels on your pedal board. Reminds me of this:

http://www.whocollection.com/LesPaul2April2007.JPG

[Drew Hallenbeck]

Love the artwork! I bet it doesn't sound to shabby either.

I like the labels on your pedal board. Reminds me of this:

http://www.whocollection.com/LesPaul2April2007.JPG

Yup, sounds real good. And the labels are pretty cool but I can't take credit for that. Not my board.
It belongs to John Baizley of Baroness.

[GrindCustoms]

Very nice!

Is that a vero Tenebrion?

Not a Tenebrion but it looks like it's probably a pretty similar circuit.
It's actually a culturejam Box-of-Hall built with the heavenwithin mods.

Ok! Well that's a Tenebrion, CultureJam and I develloped the Tenebrion from the Box-of-Hall, what is the heaven within mod?

[Drew Hallenbeck]

Very nice!

Is that a vero Tenebrion?

Not a Tenebrion but it looks like it's probably a pretty similar circuit.
It's actually a culturejam Box-of-Hall built with the heavenwithin mods.

Ok! Well that's a Tenebrion, CultureJam and I develloped the Tenebrion from the Box-of-Hall, what is the heaven within mod?

Only differences with the mod are a couple of resistor and capacitor values.
I got the layout from tagboard effects. Heard a demo with the "heavenwithin" mod and really liked the sound so I went with it.
Was in a bit of a time crunch otherwise I would have played around a bit with different values.
It turned out great, now I need to build another one to keep for myself. I only had a couple of medium bricks on hand. Think I'll try a long in the next one.

[GrindCustoms]

Very nice!

Is that a vero Tenebrion?

Not a Tenebrion but it looks like it's probably a pretty similar circuit.
It's actually a culturejam Box-of-Hall built with the heavenwithin mods.

Ok! Well that's a Tenebrion, CultureJam and I develloped the Tenebrion from the Box-of-Hall, what is the heaven within mod?

Only differences with the mod are a couple of resistor and capacitor values.
I got the layout from tagboard effects. Heard a demo with the "heavenwithin" mod and really liked the sound so I went with it.
Was in a bit of a time crunch otherwise I would have played around a bit with different values.
It turned out great, now I need to build another one to keep for myself. I only had a couple of medium bricks on hand. Think I'll try a long in the next one.

That's cool, i'll have a look at it, thanks for the input mate!

I have mostly always built those reverb type with the Long brick as it was more responsive with the feedback control and also because from light to medium reverb settings they sound pretty much the same, you just get the extended range of the long brick passed that range, from what i hear.

And yeah! build one for yourself, it looks amazing!

[flanagan0718]

This thing looks awesome. I've been thinking of doing a similar build for a while now. You should post a video if possible!

That looks fantastic.  Is that an etch?  And where did you get the knobs?

PM me I still have a few left 

[culturejam]

That's beautiful, man!

And I'm stoked something I had a small part in is now being played by Baroness! One of my favorite bands as well. 

[wgc]

Looks great, cool story!