For a multi multi pedal power, grounding

[bscur]

I'm starting a 6 in one for a friend to give his son as a gift. I'm concerned about wiring all those grounds and positive wires to the 9v adapter. How can I better do this? I'm mostly concerned about the surface area on the small 9v plug area. I've do done two, but six or more wires have me concerned.

[Aristatertotle]

You could do a little vero board power distribution. One wire from the jack to the vero, other wires to your effects.

[Jebus]

If you are using 3PDT break out PCBs they usually have +9V and GND on both sides. You could just daisychain the PCBs.

Here's Rullywows version just to give you the idea: http://www.rullywow.com/product/3pdtv3-1a/

[gül]

You could do a little vero board power distribution. One wire from the jack to the vero, other wires to your effects.

This is what I do. It makes things very neat. It also is nice to be able to use the many bits of vero we all have laying around from previous builds.