PC board - Stripboard-where they buy??????

[HM]

hi wanted to ask where they buy their pcboard to tranfer you and also where they buy their Stripboard / veroboards?
I can point out some good sites on line?

thanks

[irmcdermott]

when i first started building pedals and was trying stripboard, I ordered a bunch from futurlec

http://futurlec.com/ProtoBoards.shtml

they have Large and Small Stripboards (3rd and 4th from the top)

as far as PC boards to etch, the place to get them from is a place Brian posted a link to on another topic:

http://stores.ebay.com/PCB-Laminates-Copper-Clad?_rdc=1

i'm not sure where you live, but i don't think he ships internationally, so that won't help you if you aren't in the US.

[HM]

when i first started building pedals and was trying stripboard, I ordered a bunch from futurlec

http://futurlec.com/ProtoBoards.shtml

they have Large and Small Stripboards (3rd and 4th from the top)

as far as PC boards to etch, the place to get them from is a place Brian posted a link to on another topic:

http://stores.ebay.com/PCB-Laminates-Copper-Clad?_rdc=1

i'm not sure where you live, but i don't think he ships internationally, so that won't help you if you aren't in the US.

First thanks for replying, I'm from aregntina but travel a lot to Florida and CA
and I have people working in several states, it would not be a problem in buying from anywhere, for everything I do I get to Florida.
one more question you know of any specific tool to cut the pc boards, neatly?? thanks again

[irmcdermott]

awesome! definitely get the PC boards for etching from that eBay store then.

as far as cutting, i use my Dremel tool with a cutting wheel attachment. you can also use a hacksaw, that's what i did before i got my dremel-type tool.

[HM]

awesome! definitely get the PC boards for etching from that eBay store then.

as far as cutting, i use my Dremel tool with a cutting wheel attachment. you can also use a hacksaw, that's what i did before i got my dremel-type tool.

thanks !!!