Cab-Sim/Headphone-Amp/Blender

[Marshall Arts]

This is slowly coming together. I had bad luck with the enclosure twice - it broke where I drilled the last hole (last picture, bottom left) and it had a "belly", so the toner for the lion did not stick to the enclosure (I realized before etching and covered that area with tape). Anyway, first time I did a (partly) reverse etch. This one will be treated hard, so I use it as it is.

The PCB is my take on a tillman booster, ROG Condor Cab Sim, a ROG ruby amp, a MXR MicroAmp, and a mixer all in one. I will use it to practice with headphones, blend in backing tracks, slave-power other effects, blend two cell phones for small parties, record with cab sim, drive a 1x12" cabinet (actually gets quite loud!) etc. It will work with a battery as well. The footswitch can shut off one channel (e.g. if I blend in a metronome and want to mute it temporarily).

If you dig it, I still have sample PCBs and a build documentation available...

[Ettore_M]

Nice build mate! 
I wanna build something similar for a friend of mine, but I'm going to use another Cab Sim circuit,  maybe the Marshall one. How does your combo sound?

Hector

[Marshall Arts]

The cab sim uses the values from the marshall circuit (Details: http://www.runoffgroove.com/condor.html).

It sounds well with headphones, I added an additional Hi-cut for less noise/hiss (cuts off high enough to not influence the guitar signal too much but prevent ear fatigue). Switching the Cab-Sim on and off produces a clicking noise (only once, so I can live with that). It can be loud on a cab, at very high settings (beyond living room level) it gets noisy / oscillates. It is perfect for the use cases I intended it for.

[Lubdar]

Thats really cool!

[287m]

always nice build mfunky

the lion make me remember simba lion king, maybe the first cartoon movie i watch in theatre with my own money when i kids, under 10

[SlaveUnit]

Very cool and very handy tool!

[jtaormina]

Dude you can totally fix that with some JB Weld I'm sure of it. That stuff is strong as hell.

[Marshall Arts]

Dude you can totally fix that with some JB Weld I'm sure of it. That stuff is strong as hell.

Never heard of that - cool, I will try that, thanks!

[Marshall Arts]

Build instruction attached

[Marshall Arts]

my vacation setup: Zendrive into HOF reverb into Leo Cab Sim Amp into Headphone. Blended with a great youtube backing track (Robben Ford "Help the Poor"). I used to use positive grid, but this is way better (especially with youtube backing tracks, which was never possible with positive grid).

[Muadzin]

I'm so glad this project is back on. I was worried it had disappeared in the Great Forum Crash.

[copachino]

do you still have some pcbs??

[matmosphere]

What is the guitar? Couldn't quiet place it. Tele with hummbucker bridge, single coil neck and deluxe pickgaurd?

[Marshall Arts]

do you still have some pcbs??

yes - please send me a personal message for details.

[Marshall Arts]

What is the guitar? Couldn't quiet place it. Tele with hummbucker bridge, single coil neck and deluxe pickgaurd?

The guitar is a partscaster: Sunburst Strat body with humbucker tele bridge, the creamery wide range humbucker, tonerider tele neck single coil, 5-way switch with Jerry-Donahue half-out-of-phase wiring, tele one piece maple neck.
It went through various iterations, with the current wiring (http://www.tdpri.com/forum/tele-technical/509479-fat-telecaster-wiring.html#post5988315) it is perfect for me.

The HOF looks a bit too much standard in this picture, I agree ;-)