News:

Forum may be experiencing issues.

Main Menu

2015 Builds Dallius McNoob

Started by Mojo Fandangle, January 21, 2016, 11:18:33 AM

Previous topic - Next topic

Mojo Fandangle

These are pretty amateur in comparison to the 2015 showcases I've seen but here's my 2015 builds anyways.
I got carried away with paint effects and arty farty ideas for enclosures last year. Nothing too fancy but it was fun.



RullyWow Super Judge (killed my one of favourite Dredd comics for this one)




Sunking 2015 (Alcohol Ink Enclosure)




Woody Accoustic Simulator (With $1 wooden Floor Sample from Hardware store)




Arcadiator ( My favourite build of 2015)



Blue Box (I love the sound of this thing but it was a difficult tight build)




DIYGP Fuzz Factory (with so called 'stone effect' paint)





Madbean Mangler with collectors edition Warholl Campbell Soup Can Logo that I botched a bit when trying to steam it off the can



Madbean Zero Point Delay (painted using a doylie as a stencil / took a while to get around to building this one)



Soda Meiser (was going for a rusty paint effect for the enclosure but failed miserably)




DeathKlaw / Mr Fusion (named after the Back to the Future II Blender that made time travel environmentally friendly)




Pig Butt IC Muff (probably my favourite Big Muff Build)


"If you don't do it yourself, no-one else will do it yourself"

https://www.youtube.com/user/MarkDally

flanagan0718

Those are some super clean looking builds man. I like the Judge Dredd decal.

midwayfair

I love decoupage! How do you protect the paper-covered builds?

m-Kresol

Definetly some cool stuff going on this year!
I build pedals to hide my lousy playing.

My projects are labeled Quantum Effects. My shared OSH park projects: https://oshpark.com/profiles/m-Kresol
My build docs and tutorials

Mojo Fandangle

Quote from: midwayfair on January 21, 2016, 04:13:33 PM
I love decoupage! How do you protect the paper-covered builds?

Thanks Jon. The decoupages were covered with a few coats of brush on clear gloss enamel + a few layers of spray clear coat. Before that, I painted a couple of layers of undercoat then used the spray clear coat to stick the paper over and sprayed some more over it to get the designs to stick down better.

After that dried, I did the 3 brush on coats then 3 spray clear gloss coats.

I would not recommend doing it with glossy paper. The one I did of the Campbells Soup can logo came out a bit bubbly because the thicker paper didn't stick down as well as the Dredd one.
"If you don't do it yourself, no-one else will do it yourself"

https://www.youtube.com/user/MarkDally