Pinnacleeeee

[brejna]

Cool! That's a clean etch. I remember a time were only a few people dare to etch their boxes... it's regarding to see how more and more of us are trying this technique now and becoming masters

Regarding the grounding technique: I usually do the same but "trap" the wire in one of the jack's holes so it's secured with the jack once you tighten the washer.

Thanks
That idea for grounding is great, it never cross my mind that I could use jack holes for this type of grounding. Although I normally ground enclosure with a open frame jacks

I usually use open frame jacks too, but when the enclosure is powdercoated both inside and outside you have to be creative .

Yup, creativity is big part of DIY

Sweet build! Nice and clean all around!

Cool! That's a clean etch. I remember a time were only a few people dare to etch their boxes... it's regarding to see how more and more of us are trying this technique now and becoming masters

Regarding the grounding technique: I usually do the same but "trap" the wire in one of the jack's holes so it's secured with the jack once you tighten the washer.

I use the plastic jacks and wrap a wire around the threads, tighten it down then solder both loose ends to the sleeve connection on the jack. Seems to work pretty well so far.

Thanks for kind words and for advice, what type of jack are you using?

Great job. I'll say it once, and I'll say it again; this is one of the most fun distortion boxes that I have. I made a PCB for mine too, but I like all the gain I can get out of it.

Thanks, it sure is great pedal. Did you have problems with boost function? I found that 1k resistor attached to source of Q1 is changing amount of gain more than 1k resistor on the Q3 and in mine build that amount of gain was tooooo much.

Super build, great looks, awesome etch! And a tidy layout there, I might be interested in a board too!

Cheers mate, glad you like it. I'll count you in for an board

[pedalhealer]

Great! How did you fill the etched graphics?

[brejna]

Great! How did you fill the etched graphics?

Thanks, I spray them in two hands..

[nzCdog]

very cool build!  class etch

[Jebus]

Awesome! Love the etch!

[Jean-Rock]

Very nice piece !

[brejna]

Thanks guys

[brejna]

Super build, great looks, awesome etch! And a tidy layout there, I might be interested in a board too!

PCBs are on sale..
Cheers

[luks999]

thats a sweet build mama 

[copachino]

Super build, great looks, awesome etch! And a tidy layout there, I might be interested in a board too!

PCBs are on sale..
Cheers

i want one

[brejna]

thats a sweet build mama 

Thanks

Super build, great looks, awesome etch! And a tidy layout there, I might be interested in a board too!

PCBs are on sale..
Cheers

i want one

here is link, shoot me PM
http://www.madbeanpedals.com/forum/index.php?topic=20725.msg203580#new