wah inductor bobin help

[copachino]

well i have access to an inductance meter so i would like to bobin my own inductor, i have a cry baby board and maybe(if i find it) a broken black inductor, so the core will be useful, but maybe you can tell me about wire gauge and inductance to achive for a some good wah wah and not the standard CB also maybe i will try to use a Weener Wah II board instead of the CB

[selfdestroyer]

well i have access to an inductance meter so i would like to bobin my own inductor, i have a cry baby board and maybe(if i find it) a broken black inductor, so the core will be useful, but maybe you can tell me about wire gauge and inductance to achive for a some good wah wah and not the standard CB also maybe i will try to use a Weener Wah II board instead of the CB

Useful information
http://web.archive.org/web/20040413072620/http://www.green-fuz.freeserve.co.uk/inductor.html
http://archive.ampage.org/articles/4/pmgd/262720/Re_Anybody_tried_winding_wah_inductors.html

Edit:
This one also:
http://www.qsl.net/k5bcq/COIL/COIL.html

Cody

[davent]

Small Bear sells an inductor kit, says to use #38 wire.

http://smallbear-electronics.mybigcommerce.com/wah-inductor-kit/

[copachino]

Small Bear sells an inductor kit, says to use #38 wire.

http://smallbear-electronics.mybigcommerce.com/wah-inductor-kit/

amazing now, id like to try something too, what if i use i pick up magnet, maybe an alnico rod, to bobin as core, dou you think it will sound something good, or its a bad idea, im triyng to recreat the self inductance of the vintage crap indcutors that sound so good

[nzCdog]

http://www.geofex.com/article_folders/wahpedl/wahped.htm
Always a good read at RG's site too

[copachino]

http://www.geofex.com/article_folders/wahpedl/wahped.htm
Always a good read at RG's site too

<ahhh i had read something of this on the site (geofex) but never the part of the bobin yourself, so a second bobbin will do the job i think this has to be a little one, i will buy 2 kits from small bear to try out