Tremolo problem

[Wellu]

Hello.
I built an Kay tremolo clone, and now on testing i can hear the actual tremolo chopping away, but no guitar signal. if i strum hard, the i can hear the guitar for a second. what could be wrong in my build?

[mgwhit]

what could be wrong in my build?

Anything.  Seriously.

Go to the Tech Help section of the forum, read the sticky posts about how to post a request for help, and open up a thread there with the information that will allow someone to help you debug your pedal.  To start with, include a link to a schematic or build document, a description of the problem, voltages of all IC or transistor pins and good photos of both sides of your board.  If you have questions about how to do anything, just ask.  You'll get help.  But you've gotta give us something to work with first.  Good luck!

[Wellu]

Thank you very much! Now i know for the future how to get help more efficiently. The tremolo started to work when i simply jumped input and output. Maybe it's not the way it is supposed to, but sounds good! Thanks again mgwhit!