Ultrastoner questions

[AntKnee]

Just building myself one of these (to Ultrastoner specs) and have a couple questions...

Am I understanding correctly that Cx and Cy are only used on the builds where they are labeled on the spreadsheet?

Are diodes 1-2 meant to be 1n914, and then D5-9 meant to be the other listed diode (1N4148), or vice versa? Or can they ALL be one or the other? I ask so that I don't make two switch positions sound the same.

Thanks!
Can't wait to get this rocking.

[selfdestroyer]

Am I understanding correctly that Cx and Cy are only used on the builds where they are labeled on the spreadsheet?

Correct.

Are diodes 1-2 meant to be 1n914, and then D5-9 meant to be the other listed diode (1N4148), or vice versa?

You can can use either 1N914 or 1N4148 in any of the positions. I used all 1N4148's in D1-2 and D5-9

Cody

[AntKnee]

Thank you!
I thought so, just wanted to be sure. I used all 1N914 in mine.

[selfdestroyer]

Thank you!
I thought so, just wanted to be sure. I used all 1N914 in mine.

Enjoy it, its a great sounding circuit for sure. If you ever want something with more mids and can cut through any mix, I suggest making the TSM680 Mk2 on the Ultrastoner board. It has not left my board since I made it.

Cody

[AntKnee]

Enjoy it, its a great sounding circuit for sure. If you ever want something with more mids and can cut through any mix, I suggest making the TSM680 Mk2 on the Ultrastoner board. It has not left my board since I made it.

Cody

Cool, thanks! I got 4 boards, intending to try multiple variations.

[GrindCustoms]

The DGM3 and VRH with the added function of the Shape control makes it a completely other beast, highly suggesting those 2.

TSM680 is a thing of beauty... all those 4 including the Ultra specs are 4 BMP with their unique character.

Have fun!

Rej