Pork Barrel chorus : C10 & C15 (8.2nF) Substitutes?

[nick]

Hi All,
Just at the end of build for my Pork Barrel chorus, but having trouble sourcing the 8.2nF caps (C10 & C15). Could somebody please advise on possible subs for these caps, if values not critical?
I've got some 10nF & some 6.8nF caps in my components box, was wondering if these would do the job(?)

Any advice would be greatly appreciated.

Many thanks
Nick

[stecykmi]

10nf should do fine.

[nick]

Many thanks Stecykmi, much appreciated.
10nF it is then! 

[bigmufffuzzwizz]

Not that its necessary, but you can solder capacitors in parallel to combine the values. So 6.8nf in parallel with a 1.5 nf would be 8.3nf which would be as close as you could get. Just a hint for later when you DIY. 

[nick]

Not that its necessary, but you can solder capacitors in parallel to combine the values. So 6.8nf in parallel with a 1.5 nf would be 8.3nf which would be as close as you could get. Just a hint for later when you DIY.  

Thanks for the advice mate. I've actually done that before with caps & resistors to get the right value (if critical), but the board  is pretty crammed as it is, with quite a high part count - there's just enough room to get the smallest of caps in there anyway!