Hardbinger one more volume.

[rosettastoned]

hi guys, I just finish with this proyect, everything works fine, but i'd like to add some more volume to this unit, as I said It works great but at maximun volume.
any resistor to increase the output in al mode?.

thanks

[Cortexturizer]

I know it because I had the problem of too much volume I think that if you change that 3k3 resistor in the preamp section to a higher value, you will get more boost out of it.

Also I am presuming more distortion. Now that's something I noticed I would rather have less of. My own troubleshooting topic about that is underway...

[madbean]

You should be able to make some volume adjustments by altering the values of R11, R12 and R13. Leave R14 at 220k. I would try halving each of those to increase the total output of the effect. Socket first, though....it may take experimentation.

[rosettastoned]

thanks guys for your quick answere, I'll spend evening working on both solution.
Brian whan you say "altering the values" you mean increase o decrease those values.

regards.

[Cortexturizer]

thanks guys for your quick answere, I'll spend evening working on both solution.
Brian whan you say "altering the values" you mean increase o decrease those values.

regards.

http://prntscr.com/5i7950 -