Deadringer II Body frequency range

[brejna]

Hi, I am preparing deadringer II finish and I wanted to put frequency range of body switch. In documents it says 720Hz to 120Hz. What are in between frequencies for 82n and 150n caps?

Brane

[madbean]

Sure, the frequencies are as follows:

.047 -> 720 Hz
.082 -> 413 Hz
.15 -> 225 Hz
.27 -> 125 Hz

The Presence switch adds in a bump at 3.12kHz in parallel with the above.

If you ever want to calculate frequency poles just plug this into Excel or a calculator: f(Hz) = 1/(6.28*R*C) where C is in uF and R is in M-ohm.
So, for the 270n cap it is f = 1/(6.28 * .27 * .0047) = 125.48Hz

[brejna]

Sure, the frequencies are as follows:

.047 -> 720 Hz
.082 -> 413 Hz
.15 -> 225 Hz
.27 -> 125 Hz

The Presence switch adds in a bump at 3.12kHz in parallel with the above.

If you ever want to calculate frequency poles just plug this into Excel or a calculator: f(Hz) = 1/(6.28*R*C) where C is in uF and R is in M-ohm.
So, for the 270n cap it is f = 1/(6.28 * .27 * .0047) = 125.48Hz

Thanks, this is very helpful..
Cheers
Brane