Cornish Buffer

[sirbergersworth]

Here is a Cornish buffer build I did on vero with a switch. I used a toggle since it sits under pedalboard and the switch body is much smaller than a stomp switch. The encloser is 2" x 4" x 1".
Great buffer.

[chuckbuick]

Nice one,  Steve.  Doesn't get much more compact than that.

[stevie1556]

Wgc - moonlighting on some projects sound interesting, hoping for some cool build reports!

Sirbergersworth - that's really neat wiring for vero! Do you find you use the switch much?

Chuckbuick - agreed. Although I've been looking at other small enclosures for a 1 knob fuzz or boost. Just to see if it can be done

[sirbergersworth]

Sirbergersworth - that's really neat wiring for vero! Do you find you use the switch much?

Thanks for the complement. wiring is only neat because there is no pot. lol
I used it quite often at first to see where I wanted it in my chain. Now, not so much. It is nice to be able to hear your rig buffered vs non buffered.


Sent from my iPad using Tapatalk

[stevie1556]

Thanks for the complement. wiring is only neat because there is no pot. lol
I used it quite often at first to see where I wanted it in my chain. Now, not so much. It is nice to be able to hear your rig buffered vs non buffered.

I'm going to get some 1590A boxes next week and try one out with a foot switch I think.

I've been doing some working out, and you can definitely get a 9mm pot in there, but possibly 2 on the same edge. I think you can just about squeeze 4 in there, so I'm going to try 2 boosters, a fuzz, and anything else I can find that's small enough! Lol