Reverb Project

[midwayfair]

I have built Jon's (Midwarfair) 1590A Rub-a-Dub found in his mini layout pack.

http://www.madbeanpedals.com/forum/index.php?topic=6371.msg54536#msg54536

Its a tight build but It can happen.

Cody

I still wake up from the nightmares. 

So I started doing this last night and in your mod notes is says "Jumper pin 3 of brick > 5.1K". Does this mean use a >5.1k resistor instead of the jumper? Also would you have any gut shots of the finished build? just curious really.

If you look on my layout, there's a jumper going from pin 1 of the op amp to pin 3 of the brick. (They're directly connected in the schematic.) I preferred a 5.1K resistor in place of that jumper for whatever reason.

[flanagan0718]

I have built Jon's (Midwarfair) 1590A Rub-a-Dub found in his mini layout pack.

http://www.madbeanpedals.com/forum/index.php?topic=6371.msg54536#msg54536

Its a tight build but It can happen.

Cody

I still wake up from the nightmares. 

So I started doing this last night and in your mod notes is says "Jumper pin 3 of brick > 5.1K". Does this mean use a >5.1k resistor instead of the jumper? Also would you have any gut shots of the finished build? just curious really.

If you look on my layout, there's a jumper going from pin 1 of the op amp to pin 3 of the brick. (They're directly connected in the schematic.) I preferred a 5.1K resistor in place of that jumper for whatever reason.

Awesome! That's what I figured. I did a test fit yesterday and it is actually lining up. Thanks for the great layout Jon. There were a couple of others in the DB folder that i was thinking about doing as well. As usual, you rock.

[copachino]

Here is a picture of the board populated but I did not take any pictures of the pedal before I sold it to a buddy... who since got his gear stolen in Santa Cruz. I still look out for the pedal online. haha

http://music.codydeschenes.com/?p=1910

Cody

does ir really fit on a 1590A?? looks quite big

[flanagan0718]

I'll post a picture of the test fit.

[selfdestroyer]

Here is a picture of the board populated but I did not take any pictures of the pedal before I sold it to a buddy... who since got his gear stolen in Santa Cruz. I still look out for the pedal online. haha

http://music.codydeschenes.com/?p=1910

Cody

does ir really fit on a 1590A?? looks quite big

It does but you have to summon the sprit of "tiny spaces". Just ask Jon.

Cody

[selfdestroyer]

Just wanted to add to this.. I was able to verify this layout tonight and it is another contender for a 1590A reverb with a Belton. This will be just as hard if not harder since it has 2 knobs but it would be a fun challenge.

This is the MOD The Deluxe Reverb - http://www.modkitsdiy.com/pedal/verb_deluxe
http://effectslayouts.blogspot.com/2015/01/mod-verb-deluxe.html

Also, check out Storyboardist's other layouts. He's doing some great stuff and needs the help with verifying his layouts. I have done 3 of them so far and they been all good.

Cody

[flanagan0718]

As promised here are some pictures of the test fitting. This thing is a super tight fit just like everyone said. I managed tho.

[Soup39]

What jacks are those...super sexy!

[flanagan0718]

You can get them at small bear but I got these on eBay. I'll see if I can find a link


Sent from my iPhone using Tapatalk

[morganp]

Oh man.  This is blowing my mind.  Must... resist...
If those bricks weren't so expensive (and mediums sold out at Small Bear) I'd be perfing up a board tonight.  So cool!

[alanp]

Sockets, TOO?!?! Wow!

[flanagan0718]

I just tested the board and this thing sounds great. Jon's mods are awesome sounding. I think I'm going to try and finish the enclosure paint tonight so I can box it up.

What jacks are those...super sexy!

Here is the link for the jacks that I bought on eBay
http://www.ebay.com/itm/10pcs-1-4-MONO-PCB-PANEL-MOUNT-HEADPHONE-JACK-2439-/400733220843?pt=LH_DefaultDomain_0&hash=item5d4d8fafeb

[blearyeyes]

Great project!

[Luke51411]

Wow... Nice project! I won't be trying this anytime soon...

[flanagan0718]

Thanks guys. I'll post it when finished.


Sent from my iPhone using Tapatalk