News:

Forum may be experiencing issues.

Main Menu

What else do I need at Mouser?

Started by jkokura, April 08, 2014, 05:27:06 PM

Previous topic - Next topic

jkokura

I have an order going in, and I'm at the $181 dollar mark. So basically, I'm paying $201 including shipping, or I could add $20 to my order and get free shipping for $201.

So remind me what I'm forgetting to pick up there so I can add it to my order.

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

GermanCdn

If you don't need to put it in right now, I'll take a spin through what I need and top you up and pay the freight from your place to mine.
The only known cure in the world for GAS is death.  That's my story, and I'm sticking to it.

jkokura

I wanna get it in today, before 3PM if possible, so it'll be here on Thursday.

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

GermanCdn

K, then I'll have to pass, I won't have a list ready by then.
The only known cure in the world for GAS is death.  That's my story, and I'm sticking to it.

Haberdasher

these are pretty sharp knobs iirc 45KN015-GRX
Looking for a discontinued madbean board?  Check out my THREAD

FABBED PCB's FOR SALE:
Now carrying Matched JFETS

pickdropper

I'd grab a 100 or so through-hole transistors or FETs.  Stock up while they are still in production.  At the cost savings of those quantities, you could always flog them off at a minor profit later if you didn't need them.
Function f(x)
Follow me on Instagram as pickdropper

jubal81

You can get one of those THAT Corp. chips to play with.
"If you put all the knobs on your amplifier on 10 you can get a much higher reaction-to-effort ratio with an electric guitar than you can with an acoustic."
- David Fair

midwayfair

Quote from: pickdropper on April 08, 2014, 05:53:50 PM
I'd grab a 100 or so through-hole transistors or FETs.  Stock up while they are still in production.  At the cost savings of those quantities, you could always flog them off at a minor profit later if you didn't need them.

Are there ANY through-hole FETs or MOSFETs left at Mouser?

Anyway:
LT1054, though you probably have plenty of these

TLE2072CP -- to replace all your 072s (seriously, the noise is noticeably better)

These nifty Murata power converters:
http://www.mouser.com/ProductDetail/Murata/NMA0515SC/?qs=%2fha2pyFaduhFiAPVWrTrFQM2YxeR6Wl2ZuHmK8xFWK4%3d

H11F1 through-hole chips before they are impossible to get any more.

davent

1/4" jacks, Neutrik NYS229's or if you prefer... the similar Switchcrafts.
"If you always do what you always did- you always get what you always got." - Unknown

If my photos are missing again... they're hosted by photobucket... and as of 06/2017 being held hostage... to be continued?

gtr2

1776 EFFECTS STORE     
Contract PCB designer

jkokura

Quote from: jubal81 on April 08, 2014, 06:08:48 PM
You can get one of those THAT Corp. chips to play with.

Already on the order ;)

Also - Jon, if I didn't either already have all that stuff or have no need for it, I'd add all those things.

I think I'll add some jacks though, good one Dave. And some Jfets. We'll see if that gets me to $200.

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

Vallhagen

...and you can order a few more Hammond boxes. The Mouser pricing on them aren't bad at all.

Cheers
Yes i still have Blüe Monster pcb-s for sale!

...and checkout: https://moodysounds.se/

jkokura

Quote from: midwayfair on April 08, 2014, 06:20:36 PM
TLE2072CP -- to replace all your 072s (seriously, the noise is noticeably better)

Wow... just one is almost $4

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

pickdropper


Quote from: midwayfair on April 08, 2014, 06:20:36 PM
Quote from: pickdropper on April 08, 2014, 05:53:50 PM
I'd grab a 100 or so through-hole transistors or FETs.  Stock up while they are still in production.  At the cost savings of those quantities, you could always flog them off at a minor profit later if you didn't need them.

Are there ANY through-hole FETs or MOSFETs left at Mouser?


BS170 and 2N7000 are both still in production....... for now.

Grabbing 100 of each would be about $20.
Function f(x)
Follow me on Instagram as pickdropper

midwayfair

Quote from: pickdropper on April 08, 2014, 06:56:12 PM

Quote from: midwayfair on April 08, 2014, 06:20:36 PM
Quote from: pickdropper on April 08, 2014, 05:53:50 PM
I'd grab a 100 or so through-hole transistors or FETs.  Stock up while they are still in production.  At the cost savings of those quantities, you could always flog them off at a minor profit later if you didn't need them.

Are there ANY through-hole FETs or MOSFETs left at Mouser?


BS170 and 2N7000 are both still in production....... for now.

Grabbing 100 of each would be about $20.

Considering how many BS170s I blow through in my recent designs, I guess I'd better do that with my next order. I'd been getting them piecemeal at Smallbear.

Maybe a groupbuy is in order. They're 8c each in quantities of 1000.