I need a drill template for a 125B with 6 pots. Anyone gots?

[midwayfair]

3 x 3

Only 125B template I could find was only two pots.

Could also use a 3 pot and extrapolate, but I'd rather not.

[alanp]

Cosmopolitan PDF, and put the 6th in the clear space between 4 and 5 on the second row of pots?

[midwayfair]

Cosmopolitan PDF, and put the 6th in the clear space between 4 and 5 on the second row of pots?

Is that a 125? Works for me!

[Clayford]

Or look at Chiboy's Black bird. Had 5 knobs and a switch

http://home.comcast.net/~gprause/BuildDocs/Black_V2.1_Build_Doc%20V2.pdf

Just need to move the switch up inline with the 2 knob row.

[hoodoo]

Or......buy a square and a metal ruler and sharpen a pencil 

[midwayfair]

Or......buy a square and a metal ruler and sharpen a pencil 

I do that even with a template. I need both.

[Jabulani Jonny]

Here's one that I used for the Multiplex JR in a 125B.  I'd move it up a hair though, as I though the knobs were a little low on the enclosure.  It's Illustrator, so there's that.

[madbean]

Do you have photoshop?