News:

Forum may be experiencing issues.

Main Menu

etched board populating question

Started by danwelsh, February 10, 2014, 11:24:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

danwelsh

February 10, 2014, 11:24:23 PM
Hi guys....so I got a loophole PCB from haberdasher and I'm just a bit confused on populating it....do I look at the original build doc and just place components as they are on that with the trace on the bottom to solder them?

gtr2

#1
February 10, 2014, 11:27:33 PM
Yes.
1776 EFFECTS STORE     
Contract PCB designer

danwelsh

#2
February 10, 2014, 11:38:13 PM
okay thanks Josh. guess I wasn't too confused then huh :)

mandrewbot3k

#3
February 10, 2014, 11:52:32 PM
On my black '65, I took a fine tip sharpie and drew on the bare side, marking each value, R1,R2, etc... so that i didnt have to keep looking back between the BOM and the layout.
Andrew

(Formerly roflcopter)

neve1272

#4
February 11, 2014, 12:35:35 AM
Quote from: mandrewbot3k on February 10, 2014, 11:52:32 PM
On my black '65, I took a fine tip sharpie and drew on the bare side, marking each value, R1,R2, etc... so that i didnt have to keep looking back between the BOM and the layout.

thats a very good idea, thanks
Kip
Print
Go Up Pages1
User actions