The Go Fuzz (Grind Custom Bendover)

[trustybs]

Hi there, just finished this bendover fuzz wich is supposed to be a tone bender like but with npn transistors that should sound like pnp.  I never played a tone bender but this sound very sillicon IMO.  Anyway, it's a good sounding hi gain fuzz.  I added a sag knob and tried a different box. Fun but i should not have put the in and out jacks on the side!

[bcalla]

Very cool!  Where did you get that enclosure?

[selfdestroyer]

The enclosure and the knobs looks great. Are thoes oven knobs?

Great build.

[trustybs]

The enclosure is from musikding and the knobs are from banzai and labelled as ampeg style knobs.  The enclosure sure looks cool but the angle of the face is a bit too sharp for easy footswitching. Anyway it was worth trying.

[Cortexturizer]

If this were in a competition it would get my vote instantly.

[micromegas]

Wow, astounding finish! I might get a walk around musikding and Banzai webpages...

[GrindCustoms]

That enclosure finish and overall exterior are really nice!

Did you use SS9013 trannies or other NPN Si with hfe between 80 and 120?

[davent]

The enclosure and the knobs looks great. Are thoes oven knobs?

Great build.

Made me chuckle... I have guitar/pedal knobs on my stove and on various dimmer switches through the house.

Very cool build!

[stevie1556]

Great build! And I absolutely love that enclosure!

[jprizz]

Very cool! Has a very vintage looking style about it.
-Josh

[trustybs]

That enclosure finish and overall exterior are really nice!

Did you use SS9013 trannies or other NPN Si with hfe between 80 and 120?

Oh yes, i should have mentioned it.  I could not find SS9013 so i ended up trying what i had in stock and put 2n5551 (the ones i like the best of the ones i tested).  May be that's why it sound very silicon.  And i don't know how to mesure hfe.  I should investigate.  Thanks for reminding me.

[televisiondown]

That's a great looking pedal!

[GrindCustoms]

That enclosure finish and overall exterior are really nice!

Did you use SS9013 trannies or other NPN Si with hfe between 80 and 120?

Oh yes, i should have mentioned it.  I could not find SS9013 so i ended up trying what i had in stock and put 2n5551 (the ones i like the best of the ones i tested).  May be that's why it sound very silicon.  And i don't know how to mesure hfe.  I should investigate.  Thanks for reminding me.

You'd either need a semi-conductor device like the Atlas to measure your trannies or you can do it with some DMM...but i don't like using that...

PM me your addy, i'll send you a measured pair of SS9013, i like that the people who support me get what they've paid for and expected by the said purchase.

Cheers!

Rej

[trustybs]

That enclosure finish and overall exterior are really nice!

Did you use SS9013 trannies or other NPN Si with hfe between 80 and 120?

Oh yes, i should have mentioned it.  I could not find SS9013 so i ended up trying what i had in stock and put 2n5551 (the ones i like the best of the ones i tested).  May be that's why it sound very silicon.  And i don't know how to mesure hfe.  I should investigate.  Thanks for reminding me.

You'd either need a semi-conductor device like the Atlas to measure your trannies or you can do it with some DMM...but i don't like using that...

PM me your addy, i'll send you a measured pair of SS9013, i like that the people who support me get what they've paid for and expected by the said purchase.

Cheers!

Rej

Wow, thanks alot, it's very kind of you.

[GrindCustoms]

Shipped... with a little extra so you can really compare

Enjoy!