Grapevine Question - Rock/Rawk Switch

[FuzzMonkey]

I'm currently working on a Grapevine build and have a question regarding the Rock/Rawk switch. Below is an image of the how to wire the DPDT switch, the question I pose is what switch position is what? With the switch in position A or position B if looking at the switch from behind. I'd be grateful for any help on this one. 

[bigmufffuzzwizz]

If you turned the pedal over so you were looking at the top which you stomp the switch, up would be position A and down would be position B.
Not quite sure exactly what your asking though.

[FuzzMonkey]

If you turned the pedal over so you were looking at the top which you stomp the switch, up would be position A and down would be position B.
Not quite sure exactly what your asking though.

Sorry for the confusion, I'm trying to find out if the switch is in the top position i.e. A is the effect in Rock or Rawk mode.

[Tpetty5]

Going from memory I think A is Rawk and B is Rock.  You will know when you wire it up.  Big difference in the two positions.

[FuzzMonkey]

Going from memory I think A is Rawk and B is Rock.  You will know when you wire it up.  Big difference in the two positions.

Thanks.