Late to the party.... 1776-Multiplex....

[GrindCustoms]

This circuit have been populated for months.....never got at boxing it because i thought i would match it up with another circuit....finally declined that option and decided to go 125B....






Had to Dremelized one of the screw post in order to fit the footswitch.....

[alanp]

Rej, you're insane! (In a very, very good way )

[Stomptown]

Wow! This is crazy Reg! Did you have to sand the PCB down to fit it in there? Great build! 

[televisiondown]

Didn't even think a 125B was an option. Wow! Looks really cool, too.

[juansolo]

You're a madman! Impressive squishage!.

[gtr2]

Downright impressive!!! 

Josh

[DutchMF]

You da man, Rej!! Nice plexicity.....

Paul

[Battery Acid]

now THAT is tight! Nice one!

[das234]

Cozy.  Very cozy.  Who's gonna put it in a 1590A now??

[GrindCustoms]

Thanks guys, this was a fun one to put together......a bit of challenge is always good!

Wow! This is crazy Reg! Did you have to sand the PCB down to fit it in there? Great build! 

Thanks Man!

I did'nt sanded the pcb....that's something i don't like to do because in some case it will expose the ground planes or live signal traces....

I just pushed the pcb down as it could go, extended the pots legs because they where definitly too short and shimmed the rotary switch with 2 jack washer so it fits snugs with the enclosure.

If i had'nt been stupid with the footswitch drilling and thought of screw post space they take......moved the I/O a bit forward and drill them so they are flush with the bottom of the enclosure.....they would have slip a bit under the pcb giving all the place needed for everything......

For the 2 Time and Feedback pots i directly cut the lugs/legs of the pots and soldered solid core extension instead....other wise they where sticking on the sidewall of the enclosure and short would occur....

Cozy.  Very cozy.  Who's gonna put it in a 1590A now??

Wait couple weeks, PickDropper will make a SMT layout and fit two of those in a 1590A! hahahaha!

[ch1naski]

Rej, you are obviously a glutton for punishment. I would have trouble with fitting that in a  milk crate, much less a 125:P

Sent from my Nexus 7 using Tapatalk 4

[icecycle66]

What's that shiny bit on the top?

[lincolnic]

Holy crap!

[GrindCustoms]

Thanks guys, you should all try that!

What's that shiny bit on the top?

The chrome knurled knob?

If that...., i don't remember where i got it....probably on a guitar...it had a set screw so i used it...lol

[pickdropper]

Wait couple weeks, PickDropper will make a SMT layout and fit two of those in a 1590A! hahahaha!

Hahaha, not bloody likely, although I'll do a layout if you promise to find a way to for 8 pots and 2 rotary switches in a 1590a. .  :-)

Great build, Rej.  Very tight quarters in there and it looks cool on the outside, too.