Serendipity Build

[rowland1]

This is my first time posting a build report. I am really happy with the way this turned out. I used a 1290NS enclosure from Pedal Parts Plus - they painted it "Purple Starlight." I drilled it and used the small Boss-like knobs from the Shack (have you noticed they now call themselves "the Shack"?). I don't usually like those knobs but they work on this one.

I put a strip of red electrical tape under the jacks because I drilled the holes a little too close to the top of the enclosure and the tip contacts were touching the enclosure.

Anyway - the pedal sounds great. My new favorite.



[attachment deleted by admin]

[rowland1]

Here is the gut shot.

[attachment deleted by admin]

[rowland1]

And on the board (next to my Yellow Shark!).

[attachment deleted by admin]

[jkokura]

I like that enclosure! Great work.

Jacob

[masterlk]

Sweet! Looks cool. I don't know about anyone else but I never get tired of gut shots...

[k.rock!]

Awesome! I've been eyeballin' that finish for a little while and I was curious about how it actually looks. It looks great!

Are you using a mono jack in the input? I've always used a stereo but I don't know if it matters?

[rowland1]

Are you using a mono jack in the input? I've always used a stereo but I don't know if it matters?

Yes, I just used a mono jack since I didn't bother adding a battery snap. The stereo jack is only helpful in preserving battery life, and then only if you pull the plug out of the jack. I never use batteries anyway.

As an aside, I attached a 2.1mm plug to a 9V battery snap that I use for testing. That way I can plug the battery into the DC jack and don't have to undo any screws.

[k.rock!]

Ah! interesting....did not know think it was related to the battery at all...thanks for teaching me something new!

Cheers!
-Kaleb

[gtr2]

Awesome, really diggin the color!

[nzCdog]

Very click looking color and I love those boss style knobs

***edit??? click = slick my bad spellug***

[Beerdog80]

looks great!