Let the weekend begin: what are ur pedal plans?

[selfdestroyer]

I am going to attempt to try another revered etch on a 125B. I really need to get one made and sent off but I have not been happy with the results on the 125B enclosures.

I have a C4 compressor and my Sunking II I need to box up.

Cody

[Gledison]

I am going to attempt to try another revered etch on a 125B. I really need to get one made and sent off but I have not been happy with the results on the 125B enclosures.

I have a C4 compressor and my Sunking II I need to box up.

Cody

How is the C4 compressor? Im boxing a cupcake. It was a sugestion of the fellows here regarding less tone alteration...
Cheers

[teknoman2]

I ve got a Univox Univibe in my hands, the weekend is dedicated to that....
tomorrow is the day for measuring trannies voltages and resistors.
I hope by the end of the month I will finally make a nice replica of this great effect.

[Jopn]

I've been picking away at the Solderman 1590a Tri-Vibe lately.  I've got the box drilled and am just about to start on the offboard wiring.  Fingers crossed!

[Willybomb]

No serious plans this weekend, but my Tayda ordr arrived the other day, so I have a vero Crunchbox to test, and Hipster to replace the 1k pot on, and a Gainster on vero I may or may not test.  I have a stack of vero builds to test actually...

[aballen]

I've gig two rub a dub deluxe that I'm going to so a dry lift mod on and see how they sound in series

[Gledison]

Flying to Brazil for the worldcup and will be not building for 2 weeks! Well, at least will try to get some pots there! And beers and gals!:)

[jtn191]

Working on finishing a few circuits I had set out since spring break. Selling some stuff to fund more purchases.

[wgc]

Flying to Brazil for the worldcup and will be not building for 2 weeks! Well, at least will try to get some pots there! And beers and gals!:)

2 weeks!  Good grief, I'm in the wrong country.

I'll be powdercoating a crybaby wah shell for my Weener build

[jhigginb]

For a collosalus build. Etched and polished last night with paint following. Did a touch up on the paint this morning, killed an hour and started clear coats. . Still have 9 more different build enclosures to layout and etch. Maybe next weekend I'll have all of then done.


Sent from my iPhone using Tapatalk

[playpunk]

That etch is awesome. I just ordered some fr4, but until that arrives I am working on finishing up my all in one and headphone amp. And getting a buffer into my ernie ball vp


Sent from my iPad using Tapatalk

[alanp]

The off season just started, so on the one hand, I have four or five weeks of beer and building.

On the other hand, no money coming in so I have to be careful with how much I spend.

Heaven and Hell!

Well, at least I have some pcbs on the way

[selfdestroyer]

3 day weekend and I know what I am going to work on already.

I got some web work to do and SQL maintinance but other than that its all about pedals.

Populate:
Moodring
Super Judge

Need to be boxed:
Chasm Reverb
4 knob FF

That should keep me busy for sure.

Cody

[Justus]

I'm part-way through my first Green Bean build and realized that I'm missing my 10R and 220R resistors (they're on their way now with another order from mklec).

I still need to debug my Pork Barrel board, but don't have my Testing Rig from Jacob yet.  (Yeah, I started with one of the harder pedals and didn't have a test rig or probe - I know I did it backwards, lol!)

And my Little Angel, the first pedal pcb I populated, is one of those where the effect is extremely faint, so I'm pretty disappointed in that.  But it appears that's probably not my fault, since that's a pretty popular problem with that circuit.

So when my stuff gets here I'm looking forward to the Green Bean build to lift my spirits, lol!  Then off to make a Snarkdoodle Llama for a friend of mine because he's a Way Huge fan.

[jjanssen1]

Hopefully populating a zero point micro II board then maybe box it up if I have any time.