Just another Klon

[pickdropper]

I wanted a buffered Klon for my work board (after a buddy of mine absconded with my other one).

Rej's new PCB is a lot nicer from a wiring standpoint.  Most of the buffered Klons can get a bit annoying when trying to keep the wiring clean.

[Parra]

great looking pedal allaround, but that footswitch wiring is just to much....awesome!

[croquet hoop]

Beautiful enclosure as usual, and the wiring is insanely clean. Is this Amphenol ribbon wire ?

[pickdropper]

Beautiful enclosure as usual, and the wiring is insanely clean. Is this Amphenol ribbon wire ?

Yes, that is the exact same wire.  It's wonderful to use.  The only thing to pay attention to is that the jacket will shrink and tear if overheated.  But that isn't a really big deal, IMHO.

[rullywowr]

Really clean looking build!  Just wondering if you could share how you mounted the PCB to the enclosure?  Thanks.

[jprizz]

THAT. IS. STUNNING. Tip of the hat to you sir, you've done it again.

[jimilee]

Stunning! Just out or curiosity,why the stereo input jack?

[pickdropper]

Really clean looking build!  Just wondering if you could share how you mounted the PCB to the enclosure?  Thanks.

Yep, I mounted it with 3M VHB foam tape and a couple of pieces of scrap acrylic.  It was a sandwich of:

VHB - Acrylic - VHB - Acrylic - VHB

That tape is really strong.  The board shouldn't go anywhere.

[pickdropper]

Stunning! Just out or curiosity,why the stereo input jack?

Just in case I change my mind and add a battery later (highly unlikely).

[slimtriggers]

Always inspiring!  Amazingly clean!

What is the finish on this one?

[jprizz]

Alright, I just looked over the pics again... I completely missed how awesome this is on the inside. I mean I knew it was neat but this is ridiculous! (in the good way) That is by far the best, neatest, off the hook wiring I've ever seen! I read Jimi's comment on the input jack and when I went back and looked at the pic, I thought to myself, "he forgot to wire it up the jacks!".  Did a double take to finally see they really are wired up. THEN. Then I looked at the X-wing switch wiring. Holy Crap... There is nothing more to say, move along, I'm done now.

[billstein]

Absolutely ridiculous! I will study this to see how wiring should be done. Fantastic.

[mjcyates]

Beautiful pedal! Everything about it.

[croquet hoop]

Yes, that is the exact same wire.  It's wonderful to use.  The only thing to pay attention to is that the jacket will shrink and tear if overheated.  But that isn't a really big deal, IMHO.

This is nice to hear, as I have ordered a fair length of it (the multicolor 10 conductors version) to give it a try. I doubt I'll come up with something comparable to your work though  

As for the finish, I'd say PPP's Copper Translucent.

[Liustucru]

I wanted a buffered Klon for my work board (after a buddy of mine absconded with my other one).

Rej's new PCB is a lot nicer from a wiring standpoint.  Most of the buffered Klons can get a bit annoying when trying to keep the wiring clean.

This is very VERY clean !!!
I don't usually like ribbon wires but you've done perfectly !!!