News:

Forum may be experiencing issues.

Main Menu

Bubba Fet - Work in progress

Started by jubal81, April 15, 2013, 05:23:03 PM

Previous topic - Next topic

jubal81

Good news: Got the new panels, and they're the right size.

Bad news: I'm still awful at toner transfer.

I had it printed on photo paper at Staples. Tried three of them and this is the best of the terrible.

Any suggestions? PnP blue? Decal? T-shirt transfer paper?

"If you put all the knobs on your amplifier on 10 you can get a much higher reaction-to-effort ratio with an electric guitar than you can with an acoustic."
- David Fair

pryde

Not sure what paper you used but I had great success with this exact paper:
http://www.officemax.com/office-supplies/paper/security-paper-specialty-punch/product-ARS22603?R=22335368&ssp=true

I think the printer might make a difference to? I use a samsung laser. printing a 300dpi.

It looks like your surface prep is ok. I wet sanded to 400 grit then cleaned it good with naptha before the transfer. Good luck